HP OpenVMS System Services Reference Manual

Contents

Index

$SETSWM

Allows a process to control whether it can be swapped out of the balance set.

Format

SYS$SETSWM [swpflg]

C Prototype

int sys$setswm (char swpflg);

Argument

swpflg

OpenVMS usage: longword_unsigned

type: longword (unsigned)

access: read only

mechanism: by value

Indicator specifying whether the process can be swapped. The swpflg argument is a longword value. The value 0 (the default) enables process swap mode, meaning the process can be swapped. The value 1 disables process swap mode, meaning the process cannot be swapped.

Description

The Set Process Swap Mode service allows a process to control whether it can be swapped out of the balance set.
When the process swap mode is enabled, the process can be swapped out; when disabled, the process remains in the balance set until (1) process swap mode is reenabled or (2) the process is deleted.
The $SETSWM service returns a condition value indicating whether process swap mode was enabled or disabled prior to the call to $SETSWM.
Required Access or Privileges

To change its process swap mode, the calling process must have PSWAPM privilege.
Required Quota

None
Related Services

$ADJSTK, $ADJWSL, $CRETVA, $CRMPSC, $DELTVA, $DGBLSC, $EXPREG, $LCKPAG, $LKWSET, $MGBLSC, $PURGWS, $SETPRT, $SETSTK, $ULKPAG, $ULWSET, $UPDSEC, $UPDSECW
To lock some but not necessarily all process pages into the balance set, use the Lock Pages in Memory ($LCKPAG) service.
For more information, see the chapter on memory management in the HP OpenVMS Programming Concepts Manual.

Condition Values Returned

SS$_WASCLR The service completed successfully. The process was not previously locked in the balance set.

SS$_WASSET The service completed successfully. The process was previously locked in the balance set.

SS$_NOPRIV The process does not have the necessary PSWAPM privilege.

$SETUAI

Modifies the user authorization file (UAF) record for a specified user.

Format

SYS$SETUAI [nullarg] ,[contxt] ,usrnam ,itmlst ,[nullarg] ,[nullarg] ,[nullarg]

C Prototype

int sys$setuai (unsigned int efn, unsigned int *contxt, void *usrnam, void *itmlst, struct _iosb *iosb, void (*astadr)(__unknown_params), int astprm);

Arguments

nullarg

OpenVMS usage: null_arg

type: longword (unsigned)

access: read only

mechanism: by value

Placeholding argument reserved to HP.
contxt

OpenVMS usage: longword

type: longword (unsigned)

access: modify

mechanism: by reference

A longword used to maintain authorization file context. The contxt argument is the address of a longword to receive a $SETUAI context value. On the initial call, this longword should contain the value --1. On subsequent calls, the value of the contxt argument from the previous call should be passed back in.
usrnam

OpenVMS usage: char_string

type: character-coded text string

access: read only

mechanism: by descriptor--fixed-length string descriptor

Name of the user whose UAF record is modified. The usrnam argument is the address of a descriptor pointing to a character text string containing the user name. The user name string can contain a maximum of 32 alphanumeric characters.
itmlst

OpenVMS usage: item_list_3

type: longword (unsigned)

access: read only

mechanism: by reference

Item list specifying which information from the specified UAF record is to be modified. The itmlst argument is the address of a list of one or more item descriptors, each of which specifies an item code. The item list is terminated by the item code 0 or by the longword 0.
The following diagram depicts the format of a single item descriptor:

The following table defines the item descriptor fields:

Descriptor Field Definition

Buffer length A word specifying the length (in bytes) of the buffer in which $SETUAI is to write the information. The length of the buffer varies, depending on the item code specified in the item code field of the item descriptor, and is given in the description of each item code. If the value of the buffer length field is too small, $SETUAI truncates the data.

Item code A word containing a user-supplied symbolic code specifying the item of information that $SETUAI is to set. The $UAIDEF macro defines these codes.

Buffer address A longword address of the buffer that specifies the information to be set by $SETUAI.

Return length address A longword containing the user-supplied address of a word in which $SETUAI writes the length in bytes of the information it actually set.

Descriptor Field	Definition
Buffer length	A word specifying the length (in bytes) of the buffer in which $SETUAI is to write the information. The length of the buffer varies, depending on the item code specified in the item code field of the item descriptor, and is given in the description of each item code. If the value of the buffer length field is too small, $SETUAI truncates the data.
Item code	A word containing a user-supplied symbolic code specifying the item of information that $SETUAI is to set. The $UAIDEF macro defines these codes.
Buffer address	A longword address of the buffer that specifies the information to be set by $SETUAI.
Return length address	A longword containing the user-supplied address of a word in which $SETUAI writes the length in bytes of the information it actually set.

The symbolic codes have the following format:

UAI$_code

nullarg

OpenVMS usage:	nullarg
type:	quadword (unsigned)
access:	write only
mechanism:	by reference

Placeholding argument reserved to HP.

nullarg

OpenVMS usage:	nullarg
type:	procedure entry mask
access:	call without stack unwinding
mechanism:	by reference

Placeholding argument reserved to HP.

nullarg

OpenVMS usage:	nullarg
type:	longword (unsigned)
access:	read only
mechanism:	by value

Placeholding argument reserved to HP.

Item Codes

UAI$_ACCOUNT
Sets, as a blank-padded 32-character string, the account name of the user.
An account name can include up to 8 characters. Because the account name is a blank-filled string, however, the buffer length field of the item descriptor should specify 32 (bytes).
UAI$_ASTLM
Sets the AST queue limit.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_BATCH_ACCESS_P
Sets, as a 3-byte value, the range of times during which batch access is permitted for primary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_BATCH_ACCESS_S
Sets, as a 3-byte value, the range of times during which batch access is permitted for secondary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_BIOLM
Sets the buffered I/O count limit.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_BYTLM
Sets the buffered I/O byte limit.
Because the buffered I/O count limit is a longword decimal number, the buffer length field in the item descriptor should specify 4 (bytes).
UAI$_CLITABLES
Sets, as a character string, the name of the user-defined CLI table for the account, if any.
Because the CLI table name can include up to 31 characters plus a size-byte prefix, the buffer length field of the item descriptor should specify 32 (bytes).
UAI$_CPUTIM
Sets the maximum CPU time limit (per session) for the process in 10-millisecond units.
Because the maximum CPU time limit is a longword decimal number, the buffer length field in the item descriptor should specify 4 (bytes).
UAI$_DEFCLI
Sets, as an OpenVMS RMS file name component, the name of the command language interpreter used to execute the specified batch job. The file specification set assumes the device name and directory SYS$SYSTEM and the file type .EXE.
Because a file name can include up to 31 characters plus a size-byte prefix, the buffer length field in the item descriptor should specify 32 (bytes).
UAI$_DEFDEV
Sets, as a 1- to 31-character string, the name of the default device.
Because the device name string can include up to 31 characters plus a size-byte prefix, the buffer length field in the item descriptor should specify 32 (bytes).
UAI$_DEFDIR
Sets, as a 1- to 63-character string, the name of the default directory.
Because the directory name string can include up to 63 characters plus a size-byte prefix, the buffer length field in the item descriptor should specify 64 (bytes).
UAI$_DEF_PRIV
Sets, as a quadword value, the default privileges for the user.
Because the default privileges are set as a quadword value, the buffer length field in the item descriptor should specify 8 (bytes).
UAI$_DFWSCNT
Sets, in pages (on VAX systems) or pagelets (on Alpha and I64 systems), the default working set size.
Because the default working set size is a longword decimal number, the buffer length field in the item descriptor should specify 4 (bytes).
UAI$_DIALUP_ACCESS_P
Sets, as a 3-byte value, the range of times during which dialup access is permitted for primary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_DIALUP_ACCESS_S
Sets, as a 3-byte value, the range of times during which dialup access is permitted for secondary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_DIOLM
Sets the direct I/O count limit.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_ENCRYPT
Sets one of the values shown in the following table to identify the encryption algorithm for the primary password:

Symbolic Name Description

UAI$C_AD_II Uses a CRC algorithm and returns a longword hash value. It was used in VAX VMS releases prior to Version 2.0.

UAI$C_PURDY Uses a Purdy algorithm over salted input. It expects a blank-padded user name and returns a quadword hash value. This algorithm was used during VAX VMS Version 2.0 field test.

UAI$C_PURDY_V Uses the Purdy algorithm over salted input. It expects a variable-length user name and returns a quadword hash value. This algorithm was used in VMS releases prior to Version 5.4.

UAI$C_PURDY_S Uses the Purdy algorithm over salted input. It expects a variable-length user name and returns a quadword hash value. This is the current algorithm that the operating system uses for all new password changes.

UAI$C_PREFERED_ALGORITHM Represents the latest encryption algorithm that the operating system uses to encrypt new passwords. Currently, it equates to UAI$C_PURDY_S. HP recommends that you use this symbol in source modules.

Because the encryption algorithm is a byte in length, the buffer length field in the item descriptor should specify 1 (byte).
UAI$_ENCRYPT2
Sets one of the following values, indicating the encryption algorithm for the secondary password. For a description of the algorithms, see the UAI$_ENCRYPT item code.
UAI$C_AD_II
UAI$C_PURDY
UAI$C_PURDY_V
UAI$C_PURDY_S
UAI$C_PREFERED_ALGORITHM

UAI$_ENQLM
Sets the lock queue limit.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_EXPIRATION
Sets, as a quadword absolute time value, the expiration date and time of the account.
Because the absolute time value is a quadword in length, the buffer length field in the item descriptor should specify 8 (bytes).
UAI$_FILLM
Sets the open file limit.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_FLAGS
Sets, as a longword bit vector, the various login flags set for the user.
Each flag is represented by a bit. The $UAIDEF macro defines the following symbolic names for these flags:

Symbol Description

UAI$V_AUDIT All actions are audited.

UAI$V_AUTOLOGIN User can only log in to terminals defined by the Automatic Login facility (ALF).

UAI$V_CAPTIVE User is restricted to captive account.

UAI$V_DEFCLI User is restricted to default command interpreter.

UAI$V_DISACNT User account is disabled. Same as /FLAG = DISUSER qualifier in AUTHORIZE.

UAI$V_DISCTLY User cannot use Ctrl/Y.

UAI$V_DISFORCE_PWD_CHANGE User will not be forced to change expired passwords at login.

UAI$V_DISIMAGE User cannot issue the RUN or MCR commands or use the foreign command mechanism in DCL.

UAI$V_DISMAIL Announcement of new mail is suppressed.

UAI$V_DISPWDDIC Automatic checking of user-selected passwords against the system dictionary is disabled.

UAI$V_DISPWDHIS Automatic checking of user-selected passwords against previously used passwords is disabled.

UAI$V_DISPWDSYNCH When set, prevents synchronizing a user's SYSUAF.DAT password using an external authentication password (when UAI$V_EXTAUTH is set).

UAI$V_DISRECONNECT User cannot reconnect to existing processes.

UAI$V_DISREPORT User will not receive last login messages.

UAI$V_DISWELCOME User will not receive the login welcome message.

UAI$V_EXTAUTH User is considered externally authenticated by an external user ID and password and not by the SYSUAF user name and password. The SYSUAF record is still used for checking login restrictions and quotas and for creating the user's OpenVMS process profile.

UAI$V_GENPWD User is required to use generated passwords.

UAI$V_LOCKPWD SET PASSWORD command is disabled.

UAI$V_MIGRATEPWD User's SYSUAF password was set using AUTHORIZE or SYS$SETUAI and is likely to be inconsistent with the user's external user password. If password migration is enabled, the system will attempt to update the external authorization service the next time the user attempts a login.

UAI$V_NOMAIL Mail delivery to user is disabled.

UAI$V_PWD_EXPIRED Primary password is expired.

UAI$V_PWD2_EXPIRED Secondary password is expired.

UAI$V_RESTRICTED User is limited to operating under a restricted account. Clear the CAPTIVE flag (UAI$V_CAPTIVE), if set, before setting the RESTRICTED flag. (For a description of restricted and captive accounts, see the HP OpenVMS Guide to System Security.)

UAI$V_VMSAUTH When set, the user is allowed to authenticate with the SYSUAF.DAT user name and password (when UAI$V_EXTAUTH is set).

UAI$_JTQUOTA
Sets the initial byte quota with which the jobwide logical name table is to be created.
Because this quota is a longword decimal number, the buffer length field in the item descriptor should specify 4 (bytes).
UAI$_LASTLOGIN_I
Sets, as a quadword absolute time value, the date of the last interactive login.
UAI$_LASTLOGIN_N
Sets, as a quadword absolute time value, the date of the last noninteractive login.
UAI$_LGICMD
Sets, as an OpenVMS RMS file specification, the name of the default login command file.
Because a file specification can include up to 63 characters plus a size-byte prefix, the buffer length field of the item descriptor should specify 64 (bytes).
UAI$_LOCAL_ACCESS_P
Sets, as a 3-byte value, the range of times during which local interactive access is permitted for primary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_LOCAL_ACCESS_S
Sets, as a 3-byte value, the range of times during which local interactive access is permitted for secondary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_LOGFAILS
Sets the count of login failures.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_MAXACCTJOBS
Sets the maximum number of batch, interactive, and detached processes that can be active at one time for all users of the same account. The value 0 represents an unlimited number.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_MAXDETACH
Sets the detached process limit. The value 0 represents an unlimited number.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_MAXJOBS
Sets the active process limit. A value of 0 represents an unlimited number.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_NETWORK_ACCESS_P
Sets, as a 3-byte value, the range of times during which network access is permitted for primary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_NETWORK_ACCESS_S
Sets, as a 3-byte value, the range of times during which network access is permitted for secondary days. Each bit set represents a 1-hour period, from bit 0 as midnight to 1 a.m., to bit 23 as 11 p.m. to midnight.
The buffer length field in the item descriptor should specify 3 (bytes).
UAI$_OWNER
Sets, as a character string, the name of the owner of the account.
Because the owner name can include up to 31 characters plus a size-byte prefix, the buffer length field of the item descriptor should specify 32 (bytes).
UAI$_PASSWORD
Sets the specified plaintext string as the primary password for the user and updates the primary password change date. You must have SYSPRV privilege to set passwords for any user account (including your own).
The UAI$_PASSWORD and UAI$_PASSWORD2 item codes provide the building blocks for designing a site-specific SET PASSWORD utility. Note that if you create such a utility, you should also set the LOCKPWD bit in the user authorization file (UAF) to prevent users from using the DCL command SET PASSWORD and to prevent the LOGINOUT process from forcing password changes. If you create a site-specific SET PASSWORD utility, install the utility with SYSPRV privilege.
You must adhere to the following guidelines when specifying a password with UAI$_PASSWORD or UAI$_PASSWORD2:

The password must meet the minimum password length defined for the user account.
The password cannot exceed 32 characters in length.
The password must be different from the previous password.

To clear the primary password, specify the value 0 in the buffer length field.
When you use $SETUAI to change the password on an account that has the UAI$V_EXTHAUTH flag set, the UAI$V_MIGRATEPWD flag is set automatically.

Note
If you specify UAI$_PASSWORD, the UAI$_PWD_DATE item is ignored. To use these two item codes, you must use them in two separate calls.
To generate a pre-expired password, follow the instructions in the the "Description" section at the end of this system service documentation."

UAI$_PASSWORD2
Sets the specified plaintext string as the secondary password for the user and updates the secondary password change date. You must have SYSPRV privilege to set passwords for any user account (including your own).
To clear the secondary password, specify the value 0 in the buffer length field.

Note
If you specify UAI$_PASSWORD2, the UAI$_PWD2_DATE item is ignored. To use these two item codes, you must use them in two separate calls.
To generate a pre-expired password, follow the instructions in the the "Description" section at the end of this system service documentation.

UAI$_PBYTLM
Sets the paged buffer I/O byte count limit.
Because the paged buffer I/O byte count limit is a longword decimal number, the buffer length field in the item descriptor should specify 4 (bytes).
UAI$_PGFLQUOTA
Sets, in pages (on VAX systems) or pagelets (on Alpha and I64 systems), the paging file quota.
Because the paging file quota is a longword decimal number, the buffer length field in the item descriptor should specify 4 (bytes).
UAI$_PRCCNT
Sets the subprocess creation limit.
Because this decimal number is a word in length, the buffer length field in the item descriptor should specify 2 (bytes).
UAI$_PRI
Sets the default base priority.
Because this decimal number is a byte in length, the buffer length field in the item descriptor should specify 1 (byte).
UAI$_PRIMEDAYS
Sets, as a byte bit vector, the primary and secondary days of the week.
Each bit represents a day of the week, with the bit clear representing a primary day and the bit set representing a secondary day. The $UAIDEF macro defines the following symbolic names for these bits:
UAI$V_MONDAY
UAI$V_TUESDAY
UAI$V_WEDNESDAY
UAI$V_THURSDAY
UAI$V_FRIDAY
UAI$V_SATURDAY
UAI$V_SUNDAY

UAI$_PRIV
Sets, as a quadword value, the names of the privileges that the user holds.
Because the privileges are set as a quadword value, the buffer length field in the item descriptor should specify 8 (bytes).
UAI$_PWD
Sets, as a quadword value, the hashed primary password of the user.
Because the hashed primary password is set as a quadword value, the buffer length field in the item descriptor should specify 8 (bytes).
When you use $SETUAI to change the password on an account that has the UAI$V_EXTHAUTH flag set, the UAI$V_MIGRATEPWD flag is set automatically.
UAI$_PWD_DATE
Sets, as a quadword absolute time value, the date of the last password change.
Because this value is a quadword in length, the buffer length field in the item descriptor should specify 8 (bytes).
A value of --1 indicates that the password could be marked as preexpired.

Note
If you specify UAI$_PASSWORD, the UAI$_PWD_DATE item is ignored. To use these two item codes, you must use them in two separate calls.
To generate a pre-expired password, follow the instructions in the the "Description" section at the end of this system service documentation.

UAI$_PWD_LENGTH
Sets the minimum password length.
Because this decimal number is a byte in length, the buffer length field in the item descriptor should specify 1 (byte).
UAI$_PWD_LIFETIME
Sets, as a quadword delta time value, the password lifetime.
Because this value is a quadword in length, the buffer length field in the item descriptor should specify 8 (bytes).
A quadword of 0 means that none of the password mechanisms will take effect.
UAI$_PWD2
Sets, as a quadword value, the hashed secondary password of the user.
Because the hashed secondary password is set as a quadword value, the buffer length field in the item descriptor should specify 8 (bytes).
UAI$_PWD2_DATE
Sets, as a quadword absolute time value, the last date the secondary password was changed.
Because this value is a quadword in length, the buffer length field in the item descriptor should specify 8 (bytes).

Previous Next Contents Index

OpenVMS usage:	longword_unsigned
type:	longword (unsigned)
access:	read only
mechanism:	by value

SS$_WASCLR	The service completed successfully. The process was not previously locked in the balance set.
SS$_WASSET	The service completed successfully. The process was previously locked in the balance set.
SS$_NOPRIV	The process does not have the necessary PSWAPM privilege.

OpenVMS usage:	null_arg
type:	longword (unsigned)
access:	read only
mechanism:	by value

OpenVMS usage:	longword
type:	longword (unsigned)
access:	modify
mechanism:	by reference

OpenVMS usage:	char_string
type:	character-coded text string
access:	read only
mechanism:	by descriptor--fixed-length string descriptor

OpenVMS usage:	item_list_3
type:	longword (unsigned)
access:	read only
mechanism:	by reference

Symbolic Name	Description
UAI$C_AD_II	Uses a CRC algorithm and returns a longword hash value. It was used in VAX VMS releases prior to Version 2.0.
UAI$C_PURDY	Uses a Purdy algorithm over salted input. It expects a blank-padded user name and returns a quadword hash value. This algorithm was used during VAX VMS Version 2.0 field test.
UAI$C_PURDY_V	Uses the Purdy algorithm over salted input. It expects a variable-length user name and returns a quadword hash value. This algorithm was used in VMS releases prior to Version 5.4.
UAI$C_PURDY_S	Uses the Purdy algorithm over salted input. It expects a variable-length user name and returns a quadword hash value. This is the current algorithm that the operating system uses for all new password changes.
UAI$C_PREFERED_ALGORITHM	Represents the latest encryption algorithm that the operating system uses to encrypt new passwords. Currently, it equates to UAI$C_PURDY_S. HP recommends that you use this symbol in source modules.

Symbol	Description
UAI$V_AUDIT	All actions are audited.
UAI$V_AUTOLOGIN	User can only log in to terminals defined by the Automatic Login facility (ALF).
UAI$V_CAPTIVE	User is restricted to captive account.
UAI$V_DEFCLI	User is restricted to default command interpreter.
UAI$V_DISACNT	User account is disabled. Same as /FLAG = DISUSER qualifier in AUTHORIZE.
UAI$V_DISCTLY	User cannot use Ctrl/Y.
UAI$V_DISFORCE_PWD_CHANGE	User will not be forced to change expired passwords at login.
UAI$V_DISIMAGE	User cannot issue the RUN or MCR commands or use the foreign command mechanism in DCL.
UAI$V_DISMAIL	Announcement of new mail is suppressed.
UAI$V_DISPWDDIC	Automatic checking of user-selected passwords against the system dictionary is disabled.
UAI$V_DISPWDHIS	Automatic checking of user-selected passwords against previously used passwords is disabled.
UAI$V_DISPWDSYNCH	When set, prevents synchronizing a user's SYSUAF.DAT password using an external authentication password (when UAI$V_EXTAUTH is set).
UAI$V_DISRECONNECT	User cannot reconnect to existing processes.
UAI$V_DISREPORT	User will not receive last login messages.
UAI$V_DISWELCOME	User will not receive the login welcome message.
UAI$V_EXTAUTH	User is considered externally authenticated by an external user ID and password and not by the SYSUAF user name and password. The SYSUAF record is still used for checking login restrictions and quotas and for creating the user's OpenVMS process profile.
UAI$V_GENPWD	User is required to use generated passwords.
UAI$V_LOCKPWD	SET PASSWORD command is disabled.
UAI$V_MIGRATEPWD	User's SYSUAF password was set using AUTHORIZE or SYS$SETUAI and is likely to be inconsistent with the user's external user password. If password migration is enabled, the system will attempt to update the external authorization service the next time the user attempts a login.
UAI$V_NOMAIL	Mail delivery to user is disabled.
UAI$V_PWD_EXPIRED	Primary password is expired.
UAI$V_PWD2_EXPIRED	Secondary password is expired.
UAI$V_RESTRICTED	User is limited to operating under a restricted account. Clear the CAPTIVE flag (UAI$V_CAPTIVE), if set, before setting the RESTRICTED flag. (For a description of restricted and captive accounts, see the HP OpenVMS Guide to System Security.)
UAI$V_VMSAUTH	When set, the user is allowed to authenticate with the SYSUAF.DAT user name and password (when UAI$V_EXTAUTH is set).