Document Structure
» Table of Contents |  | | » Glossary | | | » Index | | |
| | |
| ||
| ||
This manual is organized as follows:
Chapter 1 “Getting Started” defines key terms and provides information about hardware and software components. Review this chapter before performing any installation or upgrade.
Chapter 2 “Preparing to Install in an OpenVMS Cluster Environment” provides preliminary information.
Chapter 3 “Installing the OpenVMS Operating System” explains how to install the OpenVMS Alpha and OpenVMS I64 operating systems.
Chapter 4 “Before Upgrading the OpenVMS Operating System” describes how to prepare your system for an upgrade.
Chapter 5 “Preparing to Upgrade in an OpenVMS Cluster Environment” supplements Chapter 4 “Before Upgrading the OpenVMS Operating System” with additional tasks you must perform before upgrading an OpenVMS Cluster system.
Chapter 6 “Upgrading the OpenVMS Operating System” describes how to upgrade the operating system.
Chapter 7 “After Installing or Upgrading the OpenVMS Operating System” describes the tasks you must perform after installing or upgrading the operating system.
Appendix A “Booting and Shutting Down Your OpenVMS Alpha System” contains instructions for booting, halting, and shutting down OpenVMS Alpha systems. It also includes instructions for configuring boot options.
Appendix B “Configuring OpenVMS I64 Hardware Operation and Boot Operations, and Booting and Shutting Down Your System” provides an overview of the utilities available with HP Integrity servers, and explains how to configure the system console, how to configure boot options, and how to boot the OpenVMS operating system.
Appendix C “Setting Up and Performing Network Booting” explains how to set up and perform network booting for upgrades using the InfoServer utility, a software application available on OpenVMS Alpha and OpenVMS I64 systems.
Appendix D “Setting Up and Booting Fibre Channel Storage Devices” explains how to boot the Fibre Channel storage device.
Appendix E “Backing Up and Restoring the System Disk” explains how to back up and restore the system disk.
Appendix F “Installing the OpenVMS Internationalization Data Kit” discusses the OpenVMS internationalization data kit (VMSI18N) and how to install it.
Appendix G “Preparing to Use OpenVMS Management Station” explains how to prepare your OpenVMS system and your PC to run the OpenVMS Management Station server and client software.
Appendix H “Removing the OpenVMS Operating System” explains how to remove the OpenVMS operating system from your disk.
Appendix I “Alternative Ways to Initialize the System Disk” explains alternate methods of initializing an OpenVMS Alpha or OpenVMS I64 system disk and includes information about diagnostic partitions on OpenVMS I64 system disks.
The “Glossary” defines key terms used in this manual.