hp.com home products and services support and drivers solutions how to buy
cd-rom home
End of Jump to page title
HP OpenVMS systems
documentation

Jump to content


HP OpenVMS System Analysis Tools Manual

HP OpenVMS System Analysis Tools Manual


Previous Contents Index


Chapter 9
SDA Extended File Cache Extension (XFC)

This chapter describes the SDA extension commands for the Extended File Cache (XFC).

9.1 Overview of SDA XFC Extensions

The SDA extension commands for Extended File Cache (XFC) enable you to perform the following tasks:

9.2 SDA XFC Commands List

The section describes the SDA XFC extension commands:

EXIT
LOAD DSF
SHOW CONTEXT
SHOW EXTENT
SHOW FILE
SHOW MEMORY
SHOW SUMMARY
SHOW TABLES
SHOW TRACE
SHOW VOLUME

Commands can be entered at the SDA prompt. For example:


SDA> XFC SHOW SUMMARY 

Alternatively, the XFC extension can be invoked without a command, in which case the XFC extension prompts for commands. For example:


SDA> 
XFC> SHOW SUMMARY 
XFC> EXIT 
SDA> 

Note that if this alternative approach is used and the output from a command does not fit on one screen, the screen overflow prompt remains an SDA prompt and accepts SDA commands, not XFC commands. See Section 2.6.2 for an explanation of the screen overflow prompt.


EXIT

Exits the XFC SDA extension.

Format

EXIT


Parameters

None.

Qualifiers

None.

Description

The EXIT command issued from the SDA> prompt exits you from SDA to the DCL ($) prompt. If you invoke XFC at the SDA> prompt, you receive an XFC> prompt, from which you can then invoke a specific command, for example, SHOW SUMMARY. If you invoke EXIT at the XFC> prompt, you are returned to the SDA> prompt.

Example


SDA> XFC
XFC> SHOW SUMMARY
XFC Summary 
----------- 
Extended File Cache V1.0 (May  6 2002 11:33:46) 
Anchor Block Address:             FFFFFFFF80D30410 
Build Id: 
Cache State:                      0000A010 
Cache in no-cache state:          False 
   .
   .
   .
XFC>EXIT
SDA>

This command shows the procedure for exiting from the XFC extension.


LOAD DSF

Loads the symbols in the specified debug symbol file (DSF) for use with the SDA FORMAT command.

Format

LOAD DSF filename


Parameter

filename

The name of the symbol file.

Qualifiers

None.

Description

The LOAD DSF command loads the symbol tables for the XFC internal data structures. The XFC symbol tables are contained in a file SYS$XFCACHE.DSF, which is located in the system directory, SYS$LOADABLE_IMAGES. This command is not available on OpenVMS I64.


Example


SDA> XFC SHOW FILE/BRIEF
XFC Cache File Block brief listing 
---------------------------------- 
CFB Address      CVB Address      Volume Name       File ID           Access  
FFFFFFFD83120D40 FFFFFFFD831FA080 DISK$FRROOG_RUBY            (541,5,0)    0    
   .
   .
   .
SDA> FORMAT FFFFFFFD83120D40 
%SDA-E-NOSYMBOLS, no "VCC_CFB" symbols found to format this block 
DA> xfc load dsf sys$loadable_images:sys$xfcache 
Reading symbols from SYS$SYSROOT:[SYS$LDR]SYS$XFCACHE.DSF;21
Loaded 825 symbols>
SDA>  FORMAT FFFFFFFD83120D40 
FFFFFFFD.83120D40   CFB$R_PSNOLDHEADER              00000001 
FFFFFFFD.83120D44                                   00000001 
FFFFFFFD.83120D48   CFB$W_UWMUSTBEONE                   0001 
FFFFFFFD.83120D4A   CFB$B_BTYPE                       6F 
FFFFFFFD.83120D4B   CFB$B_BSUBTYPE                  40 
FFFFFFFD.83120D4C   CFB$R_PFCBFILE                  81935900 
FFFFFFFD.83120D50   CFB$Q_UQSIZE                    0000021C 
FFFFFFFD.83120D54                                   00000000 
FFFFFFFD.83120D58   CFB$R_PCVBCACHEVOLUME           831FA080 
FFFFFFFD.83120D5C                                   FFFFFFFD 
FFFFFFFD.83120D60   CFB$R_QHDQUEUEHEAD              83120B40 
FFFFFFFD.83120D64                                   FFFFFFFD 
FFFFFFFD.83120D68                                   83121800 
FFFFFFFD.83120D6C                                   FFFFFFFD 
   .
   .
   .
      

This example shows the output of loading symbols from the XFC debug symbols file, and using those symbols to format a CFB structure.


SHOW CONTEXT

Displays the contents of an XFC context block (CTX).

Format

SHOW CONTEXT [address][/STALLING|/FULL|/BRIEF]


Parameter

address

The address of the CTX. If no address is supplied, then all the context structures are displayed.

Qualifiers

/BRIEF

Displays a brief summary for each context; for example, the I/O type, start virtual block number (VBN), and length of I/O.

/FULL

Displays the complete context structure. This is the default.

/STALLING

Displays only contexts that are stalling; for example, those that have a stall reason code other than estrNotStalling.

Description

The SHOW CONTEXT command displays the contents of an active context block. The state of each active operation within XFC is maintained in a data structure called a context block.


Examples


This example shows the address of the context block, I/O type (the type of operation), I/O phase (what phase the operation is in), I/O stall (reason for its stalling), volume ID (address of the control volume block), start VBN (starting VBN of the I/O), length of the I/O, and I/O request packet (the address of the IRP).


2. SDA> XFC SHOW CONTEXT FFFFFFFF8190D690
List of All XFC Active Contexts (CTX) 
------------------------------------- 
Context (CTX) Address: FFFFFFFF8190D690 
I/O Phase:             eiopFillContext 
I/O Type:              eiotReadThrough 
Operation started:   17-APR-2002 11:23:29.00 
Stall Reason:          estrWindowTurn 
Stall Extent:          0000000000000000 
Stall Op (IRP):        FFFFFFFF81267A40 
Saved AST Parameter:   0000000000000000 
Restart Routine:       0000000000000000 
Context state flags    00000000 
  Cache Hit:               False 
  HWM Checked:             False 
  Fork Restarted           False 
  AST Required (flush)     False 
  Buffer locked            False 
  Stalled converting       False 
  Fork Block in use        False 
  Override resource checks False 
  Restart cluster trans    False 
  Restart cluster flush    False 
  MV volumes skipped       False 
  Depose pending           False 
  Ignore CFB Quiesce       False 
  Delete CFB               False 
  Read-ahead hit           False 
ECB Count:                      0 
Index:                 00000000 (         0) 
Start VBN:             000107C1 (     67521) 
Length in Blocks:      00000020 (        32) 
Next VBN:              000107C1 (     67521) 
I/O Extent Count:               0 
Disk I/O Length:       00000020 (        32) 
Bytes Copied:                   0 
Bytes Zeroed:                   0 
Bytes Requested:            16384 
Volume (CVB):          0000000000000000 
Volume Id:             FFFFFFFD8311BD00 
File Id:               0000000000000C54 
Cache File Block:      FFFFFFFD82CEA2A0 
Process (PCB):         FFFFFFFF818FA500

This example shows output of a full display of a context block for a read I/O.


SHOW EXTENT

Displays the contents of an extent control block (ECB).

Format

SHOW EXTENT address


Parameter

address

The address of the ECB.

Qualifiers

None.

Description

The SHOW EXTENT command diplays the contents of an extent control block (ECB). The data in the cache is divided into groups of VBNs called extents. Each extent is maintained in a data structure called an extent control block.

Example


SDA> XFC SHOW EXTENT FFFFFFFD82A58A20
Cache Extent Address:  FFFFFFFD82A58A20 
Type:                  Primary 
Flink:                 FFFFFFFF7F880350 
Blink:                 FFFFFFFF7F880350 
Start VBN:             00000001 (         1) 
Start LBN:             00BA711C (  12218652) 
Length in Blocks:      00000006 (         6) 
Data State:            Clean 
Pin:                   None 
Buffer Address:        FFFFFFFDB0996000 
Secondary ECB Queue:   FFFFFFFD82A58A60 
    Flink:               FFFFFFFD83199A20 
    Blink:               FFFFFFFD83199A20 
Primary ECB:           0000000000000000 
LRU Queue:             FFFFFFFD82A58AAC 
    Flink:               FFFFFFFD82A5A26C 
    Blink:               FFFFFFFD82A5344C 
Waiters Queue:         FFFFFFFD82A58A50 
    Flink:               FFFFFFFD82A58A50 
    Blink:               FFFFFFFD82A58A50 
Lock Id:               00000000 
Parent CFB:            FFFFFFFD82A61180 
ECB delete pending     False 
ECB on LRU queue       True 
ECB depose pending     False 
ECB read ahead         False 
LRU priority:             1
      

This example shows the contents of an extent control block.


SHOW FILE

Displays the contents of the cache file block (CFB).

Format

SHOW FILE [address] [/EXTENTS|/ID=file-id
|/CVB=address |/OPEN|/CLOSED|/STATISTICS |/FULL
|/BRIEF]


Parameter

address

The address of the CFB. The /OPEN and /CLOSED qualifiers, if present, are ignored. If no address is supplied, then all the CFBs are displayed.

Qualifiers

/BRIEF

Displays summary information for each cache file block (CFB), such as the CFB address, cache volume block (CVB) address, access count, active I/O count, and file ID.

/CLOSED

Displays only CFBs whose access count is zero.

/CVB=address

Displays only information about any files matching the given cache volume block address.

/EXTENTS

Displays the cache extents held in cache for any displayed files. This shows the primary and secondary cache extents along with their data state and virtual block numbers (VBNs). It also shows a summary of memory usage (pagelets used and pagelets valid) for any displayed files. The /EXTENTS qualifier is incompatible with the /BRIEF qualifier.

/FULL

Displays all fields for each cache file block. This is the default.

/ID=file-id

Displays only information about any files matching the given file-identification (FID). The file identification (FID) is the hexadecimal file number component in a format file ID (file number, sequence number, relative volume number).

/OPEN

Displays only CFBs whose access count is greater than zero.

/STATISTICS

Displays more statistics about the specified file. The /STATISTICS qualifier is incompatible with the /BRIEF qualifier.

Description

The SHOW FILE command displays the contents of the XFC cache file block. The state of any file in the cache is maintained in a data structure called a cache file block (CFB). There is a CFB for every open file on a system and a CFB for each closed file that is still being cached.

Examples


This example shows the brief output from this command.


2. SDA> XFC SHOW FILE/STATISTICS FFFFFFFD831A24C0
Full Cache File Block (CFB) Details
-----------------------------------
CFB Address:           FFFFFFFD831A24C0 
CFB Address:           FFFFFFFD831A24C0 
Flink:                 FFFFFFFD831A22C0 
Blink:                 FFFFFFFD831A2700 
Access Count:                   1 
Write Access Count:             0 
Volume (CVB):          FFFFFFFD831FE080 
Quiescing:             False 
File (FCB):            FFFFFFFF81943D80 
Volume Id:             FFFFFFFD831FE080 
File Id:               0000000000000383 
External FID:          (899,4,0) 
Predicted Next VBN:    000000FB (       251) 
Active Caching Mode:   Write Through 
Active I/O count:               0 
Flush Fail Status:     00000000 (         0) 
No Readahead Reasons:           0 
Active Readaheads:              0 
File Bad:              False 
Caching disabled:      False 
File deleted on close: False 
File Quiescing:        False 
File Deposing:         False 
File Deleting:         False 
File BlkASTInProg:     False 
File IgnoreBlkAST      False 
File Readahead EOF     False 
PECBs Allocated:               13 (        13 pages) 
PECBs Deallocated:              0 
PECBs Deallocated:              0 
SECBs Allocated:                3 
SECBs Deallocated:             19 
Lock Id:               0C00037F 
   Granted Lock mode:  PRMode 
   Conversion phase:   Illegal 
Conversion phase count:         1 
Hash Bucket Queue:     FFFFFFFD831A2520 
    Flink:               FFFFFFFF7FF819B0 
    Blink:               FFFFFFFF7FF819B0 
PECB Queue:            FFFFFFFD831A2530 
    Flink:               FFFFFFFD8311888C 
    Blink:               FFFFFFFD831A072C 
Stalled IOs Queue:     FFFFFFFD831A24F0 
    Flink:               FFFFFFFD831A24F0 
    Blink:               FFFFFFFD831A24F0 
FAL transition Queue:  FFFFFFFD831A2500 
    Flink:               FFFFFFFD831A2500 
    Blink:               FFFFFFFD831A2500 
Contexts Waiting:      FFFFFFFD831A2510 
    Flink:               FFFFFFFD831A2510 
    Blink:               FFFFFFFD831A2510 
BlkASTs Waiting:       FFFFFFFD831A2540 
    Flink:               FFFFFFFD831A2540 
    Blink:               FFFFFFFD831A2540 
Deaccess Wait List:    FFFFFFFD831A2600 
    Flink:               0000000000000000 
Quiesce context:       0000000000000000 
Up convert context:    0000000000000000 
File IO Statistics - all in decimal 
----------------------------------- 
Statistics Valid From:   19-APR-2002 07:10:32.77 
 
Total QIOs to this file:                14 
Read IOs to this file:                  14 
Write IOs to this file:                  0 
Write IOs to this file:                  0 
Read Hits:                               6 
Hit Rate:                           42.86 % 
Average Overall I/O response time to this file 
 in milliseconds:                     0.9525 
Average Cache Hit I/O response time to this file 
 in milliseconds:                     0.0702 
Average Disk I/O response time to this file 
 in milliseconds:                     1.6141 
Accuracy of I/O resp time:                   65 % 
Read Ahead Count:                        0 
Read Through Count:                     14 
Write Through Count:                     0 
Read Around Count:                       0 
Write Around Count:                      0 
CFB FAL stalls:                          1 
CFB Operation stalls:                    0 
FAL Blocking ASTs:                       0 
Quiesce Depose:                          0 
Quiesce depose Stalls:                   0 
 
(I/O size statistics not collected for this file) 
 
Files found: 1

This example shows a collection of performance statistics for a file.


SHOW MEMORY

Displays information about memory used by the cache.

Format

SHOW MEMORY [/BRIEF|/FULL]


Parameters

None.

Qualifiers

/BRIEF

Displays summary statistics on XFC memory use.

/FULL

Displays full statistics on XFC memory use. This is the default.

Examples

#1

SDA> XFC SHOW MEMORY
XFC Memory Statistics
---------------------
Pool allocation calls           : 430 
Pool allocation failures        : 0 
Pool deallocation calls         : 0 
 
Page allocation calls           : 2745 
Page deallocation calls         : 6 
 
Cache VA Regions and Limits 
--------------------------- 
Cache VA region from FFFFFFFD80000000 to FFFFFFFF80000000 ( 1048576 pages) 
 
  permanent area   : FFFFFFFD80000000 to FFFFFFFDBE800000 (  128000 pages) 
            pool   : FFFFFFFD80000000 to FFFFFFFD83200000 (    6400 pages) 
            data   : FFFFFFFD83200000 to FFFFFFFDBE800000 (  121600 pages) 
 
  dynamic area     : FFFFFFFDBE800000 to FFFFFFFF7F780000 (  919488 pages) 
          pool     : FFFFFFFDBE800000 to FFFFFFFDD4F2C000 (   45974 pages) 
          data     : FFFFFFFDD4F2C000 to FFFFFFFF7F780000 (  873514 pages) 
 
  extent hash table: FFFFFFFF7F780000 to FFFFFFFF7FF80000 (    1024 pages) 
  file hash table  : FFFFFFFF7FF80000 to FFFFFFFF80000000 (      64 pages) 
  file hash table  : FFFFFFFF7FF80000 to FFFFFFFF80000000 (      64 pages) 
 
qhdPermanentPoolFreePages       : FFFFFFFF80D305B8 
qhdPermanentDataFreePages       : FFFFFFFF80D305C8 
Non-Paged Pool allocated        : 45248 (44.1 KB) 
Non-Paged Pool number of - FKBs :      403 
Non-Paged Pool number of - DBMs :        3 
Non-Paged Pool number of - CTXs :       10 
Current Maximum Cache Size      : 8589934592 (8.0 GB) 
Boottime Maximum Cache Size     : -1 
 
Permanent Data Pages: Allocated :   121600 
                      In use    :     2739 
          Pool Pages: Allocated :     6400 
                      In use    :      128 
 
Dynamic Pages: Max Allowed      :   919488 
               Allocated        :        0 
               In use           :        0 
               Min Allowed      :    20971 
   Data Pages: Allowed          :   873514 
               In use           :        0 
   Pool Pages: Allowed          :    45974 
               In use           :        0 
                  PFN List      :        0 
                  Non PFN List  :        0 
 
 
Total Cache Memory (bytes)      : 1048621248 (1000.0 MB) 
 
Private PFN List Stats 
---------------------- 
Dynamic Area PFN List           : FFFFFFFF818EB340 
Free physical pages on list     : 0 
Pages attributed to this list   : 0 
Pages being requested for return: 0 
List priority                   : 0 
Callback routine                : 80DF8A40 
Free PFN queue head             : FFFFFFFF818EB350 
  First free page               : 0000000000000000 
  Last free page                : 0000000000000000 
 
MMG Callback Counters 
--------------------- 
MMG callback active             : 0 
MMG callback count              : 0 
MMG callback requeues           : 0 
MMG callback requeue again      : 0 
Expand attempts callback active : 0 
Pages reclaimed                 : 0 
Trim reclaim attempts           : 0 
LRU depose calls TrimWorkingSet : 0 
Zone Purges: Permanent          : 0 
             Dynamic PFNLST     : 0 
             Dynamic No PFNLST  : 0 
 
Pool Zone Stats (S2 Space)        Permanent    Dynamic 
SECB: Size 112,  PerPage 71 
    Pages / MaxPages             12 / 6400     |||   0 /  45974 
    FreePkts / TotalPkts         64 /  852     |||   0 /      0 
    Hits                       5499            |||   0 
    Not first page                0            |||   0 
    Misses (expns/fails)         12 (   12 /0) |||   0 (      0 /        0) 
 
PECB: Size 176,  PerPage 45 
    Pages / MaxPages             85 / 6400     |||   0 /    45974 
    FreePkts / TotalPkts          6 / 3825     |||   0 /        0 
    Hits                       3740            |||   0 
    Not first page                0            |||   0 
    Misses (expns/fails)         85 (   85 /0) |||   0 (        0 /        0) 
 
CFB: Size 544,  PerPage 14 
    Pages / MaxPages             29 / 6400     |||   0 /    45974 
    FreePkts / TotalPkts          3 /  406     |||   0 /        0 
    Hits                        488            |||   0 
    Not first page                0            |||   0 
    Misses (expns/fails)         29 (   29 /0) |||   0 (        0 /        0) 
 
CVB: Size 608,  PerPage 13 
    Pages / MaxPages              2 / 6400     |||   0 /    45974 
    FreePkts / TotalPkts         12 /   26     |||   0 /        0 
    Hits                         12            |||   0 
    Not first page                0            |||   0 
    Misses (expns/fails)          2 (    2 /0) |||   0 (        0 /        0) 
 
IOSIZE: Size 3120,  PerPage 2 
    Pages / MaxPages              0 / 6400     |||   0 /    45974 
    FreePkts / TotalPkts          0 /    0     |||   0 /        0 
    Hits                          0            |||   0 
    Not first page                0            |||   0 
    Misses (expns/fails)          0 (    0 /0) |||   0 (        0 /        0) 
 
      

This example shows the full output from this command.

#2

SDA> XFC SHOW MEMORY/BRIEF
XFC Memory Summary
------------------
Current Maximum Cache Size      : 8589934592 (8.0 GB) 
Boottime Maximum Cache Size     : -1 
 
Permanent Data Pages: Allocated :   121600 
                      In use    :     2739 
          Pool Pages: Allocated :     6400 
                      In use    :      128 
 
Dynamic Pages: Max Allowed      :   919488 
               Allocated        :        0 
               In use           :        0 
               Min Allowed      :    20971 
   Data Pages: Allowed          :   873514 
               In use           :        0 
   Pool Pages: Allowed          :    45974 
               In use           :        0 
                  PFN List      :        0 
                  Non PFN List  :        0 
 
 
Total Cache Memory (bytes)      : 1048621248 (1000.0 MB)
      

This example shows the brief output from this command.


SHOW SUMMARY

Displays general information about the Extended File Cache.

Format

SHOW SUMMARY [/STATISTICS]


Parameters

None.

Qualifier

/STATISTICS

Additionally, displays read and write activity arranged by I/O size.

Example


SDA> XFC SHOW SUMMARY
XFC Summary
-----------
Extended File Cache V1.0 Let unk I/Os through (Apr 18 2002 15:01:16) 
Anchor Block Address:             FFFFFFFF80D30210 
Build Id: 
Cache State:                      0000A010 
Cache in no-cache state:          False 
MaxAllowedCacheMode:              eNodeFullXFC 
Minimum cache size in Pages:      0001F400 (    128000) 
 
General 
------- 
Extent Hash Table Address:        FFFFFFFF7F780000 
Extent Hash Table Buckets:            524287 
File Hash Table Address:          FFFFFFFF7FF80000 
File Hash Table Buckets:               32767 
Count of private CTXs:                    10 
Count of private FKBs:                   403 
Count of private DIOBMs:                   3 
 
LRU 
--- 
LRU Priority 0 Queue Address:     FFFFFFFF80D30288 
               Queue Length:      00000446 (      1094) 
LRU Priority 1 Queue Address:     FFFFFFFF80D30298 
               Queue Length:      00000AA5 (      2725) 
qhdContexts Address               FFFFFFFF80D302B0 
qhdIRPs Address                   FFFFFFFF80D302C0 
 
Spinlock 
-------- 
Cache Spinlock:                   8125E780 
  Last Acquiring Module:          ROOT$:[XFC.TMPSRC]XFC_SYS.C;4 
       Acquiring Line:            2887 
       Acquiring IPL:             0 
 
Cache Tracing 
------------- 
Number of trace entries:                10000 
Size of trace buffer:                  800000 
Current trace level:                        4 
Lost trace entrys:                          0 
Current trace sequence number:         318768 
 
System Wide I/O Statistics since last reset 
------------------------------------------- 
Time of Last System-Wide Reset:   19-APR-2002 07:10:23.43 
 
Total cache calls:                      4505 
Total cache calls:                      4505 
 - Sum of Paging I/Os:                  2493 
 - and other QIOs:                      2012 
 - and NoCVB or PermNoCache QIOs:          0 
 
Total Virtual Reads:                    4197 
Total Virtual Writes:                    112 
Total PageIOs not cached:                196 
Total Logical I/Os:                        0 
Total Physical I/Os:                       0 
Total bypass write I/Os:                   0 
 
Synchronous I/O completions:             598 
Physical I/O completions:                  0 
Total PID completion I/Os:                 0 
 
Total num IOs on reserved files:        1606 
Total num IOs on global sections:        247 
Count of stalls performed:                13 
 
System Wide Read Percentage:           97.40 % 
System Wide Cache Hit ratio:           57.90 % 
 
System-Wide Read Statistics since last reset 
-------------------------------------------- 
Virtual Reads:                          4197 
  Sum of Read Around Count:              179 
  and Read Through Count:               4018 
Reads Completed:                        4197 
Read Hits:                              2495 
Read Cache Hit Percentage:             59.45 % 
Total Synch Completion Count:            598 
Read Around due to Het. Cluster:           0 
Read Around due to Modifiers:              0 
Read Around due to Size:                  16 
Total reads past EOF:                      1 
Total I/Os with read-ahead:              239 
Read Hits due to read-ahead:             307 
Paging I/Os:                            2493 
 
System-Wide Write Statistics since last reset 
--------------------------------------------- 
Virtual Writes:                          112 
  Sum of Write Around Count:               0 
  and Write Through Count:               112 
Write Around due to Het. Cluster:          0 
Writes Completed:                        112 
Write Around due to Modifiers:             0 
Write Around due to Size:                  0 
Total writes past EOF:                     0 
 
File/Volume Statistics 
---------------------- 
Open Files:                              239 
Closed Files in the Cache:               164 
Number of files truncated:                 3 
Volumes in Full XFC Mode:                  0 
Volumes in VIOC Compatible Mode:          13 
Volumes in No Caching Mode:                1 
Volumes in Perm. No Caching Mode:          0 
Volume Queue:                     FFFFFFFF80D30238 
 
File/Volume Statistics 
---------------------- 
FAL locks currently held:                370 
FAL locks chosen to skip:                  0 
FAL locks acquired since boot:           374 
FAL locks released since boot:             4 
FAL locks converted:                      55 
 
I/Os that have stalled for FAL             0 
CACHE$ACCESS stalls for CFB                0 
ulStallOpQStalls                           1 
Read-thro->Read-around conv.               0 
Writes converted to write-around           0 
ulLockResourceExhaustionRetries:           0 
ulFALLocksEverInContention:                3 
ulFALUpConversionRequests:                 3 
ulFALLocksConvertedToPR:                   0 
ulFALLocksConvertedToNL:                   0 
FAL BlkASTs received:                      1 
FAL BlkASTs ignored:                       0 
ECBs Split Right:                       2229 
ECBs Split Left:                        1710 
ECBs Split Three Ways:                   786 
ECBs Requiring no splits:               5802 
 
Volume Lock Statistics 
---------------------- 
VIL Blocking ASTs received                 0 
VIL Blocking ASTs stalled                  0 
VIL Blocking ASTs started                  0 
VIL Blocking ASTs completed                0 
VIL Up-conversion requests made            0 
VIL Up-conversion grants                   0 
VCML Blocking ASTs received                0 
VCML Blocking ASTs stalled                 0 
VCML Blocking ASTs started                 0 
VCML Blocking ASTs completed               0 
VCML Up-conversion requests made           0 
VCML Up-conversion grants                  0 
Stalls on VCML up-conversion               0 
Restarts on VCML up-conversion             0 
 
Quiesce and Depose Statistics 
----------------------------- 
Quiesce and Depose files Stalled:          0 
File Quiesce and Deposes Started:        114 
File Quiesce and Deposes Cmpltd:         114 
File Quiesce and Deposes Cmpltd:         114 
Q&D CTX used count:                        0 
Q&D CTX in use:                   False 
 
Most recent Depose time                    0.0005 msec. 
Most recent Depose ECB count               0 
Maximum Depose time                        0.1125 msec. 
Maximum ECBs deposed                       3 
Total Depose time                          0.0002 seconds 
Total ECBs deposed                         6 
 
Pending Lock Up-conversion Statistics 
------------------------------------- 
Up-conversions stalled:                    0 
Up-conversions started:                    0 
 
      


Previous Next Contents Index