HP OpenVMS System Analysis Tools Manual

Contents

Index

SHOW CPU

When analyzing a dump, displays information about the state of a CPU at the time of the system failure.
SHOW CPU is only valid when you are analyzing a crash dump. It is not a valid command when you are analyzing the running system, because all the CPU-specific information may not be available. If invoked when you are analyzing a running system, SHOW CPU will only list the CPU database address(es) for the specified CPU or all CPUs.

Format

SHOW CPU [cpu-id]

Parameter

cpu-id
Numeric value from 00 to 1F₁₆ indicating the identity of the CPU for which context information is to be displayed. If you specify a value outside this range, or you specify the cpu-id of a CPU that was not active at the time of the system failure, SDA displays the following message:
%SDA-E-CPUNOTVLD, CPU not booted or CPU number out of range
If you use the cpu-id parameter, the SHOW CPU command performs an implicit SET CPU command, making the CPU indicated by cpu-id the current CPU for subsequent SDA commands. (See the description of the SET CPU command and Section 2.5 for information on how this can affect the CPU context---and process context---in which SDA commands execute.)

Qualifiers

None.

Description

The SHOW CPU command displays system failure information about the CPU specified by cpu-id or, by default, the SDA current CPU, as defined in Section 2.5.
The SHOW CPU command produces several displays. The first display is a brief description of the system failure and its environment that includes the following:
Reason for the bugcheck.
Name of the currently executing process. If no process has been scheduled on this CPU, SDA displays the following message:
Process currently executing: no processes currently scheduled on the processor
File specification of the image executing within the current process (if there is a current process).
Interrupt priority level (IPL) of the CPU at the time of the system failure.
The CPU database address.
The CPU's capability set.
On Alpha, the register display follows. First the general registers are output, showing the contents of the CPU's integer registers (R0 to R30), and the AI, RA, PV, FP, PC, and PS at the time of the system failure.
The Alpha processor registers display consists of the following parts:

Common processor registers
Processor-specific registers
Stack pointers

The first part of the processor registers display includes registers common to all Alpha processors, which are used by the operating system to maintain the current process virtual address space, system space, or other system functions. This part of the display includes the following registers:

Hardware privileged context block base register (PCBB)
System control block base register (SCBB)
Software interrupt summary register (SISR)
Address space number register (ASN)
AST summary register (ASTSR)
AST enable register (ASTEN)
Interrupt priority level register (IPL)
Processor priority level register (PRBR)
Page table base register (PTBR)
Virtual page table base register (VPTB)
Floating-point control register (FPCR)
Machine check error summary register (MCES)

On I64, the register display is in the form of the contents of the exception frame generated by the bugcheck. See SHOW CRASH for more details.
The last part of the display includes the four stack pointers: the pointers of the kernel, executive, supervisor, and user stacks (KSP, ESP, SSP, and USP, respectively). In addition, on I64, the four register stack pointers are displayed: KBSP, EBSP, SBSP, UBSP.
The SHOW CPU command concludes with a listing of the spinlocks, if any, owned by the CPU at the time of the system failure, reproducing some of the information given by the SHOW SPINLOCKS command. The spinlock display includes the following information:

Name of the spinlock.
Address of the spinlock data structure (SPL).
The owning CPU's CPU ID.
IPL of the spinlock.
Indication of the depth of this CPU's ownership of the spinlock. A number greater than 1 indicates that this CPU has nested acquisitions of the spinlock.
Rank of the spinlock.
Timeout interval for spinlock acquisition (in terms of 10 milliseconds).
Shared array (shared spinlock context block pointers)

Example


SDA> SHOW CPU 0 CPU 00 Processor crash information ---------------------------------- CPU 00 reason for Bugcheck: CPUEXIT, Shutdown requested by another CPU Process currently executing on this CPU: None Current IPL: 31 (decimal) CPU database address: 81414000 CPUs Capabilities: PRIMARY,QUORUM,RUN General registers: R0 = FFFFFFFF.81414000 R1 = FFFFFFFF.81414000 R2 = 00000000.00000000 R3 = FFFFFFFF.810AD960 R4 = 00000000.01668E90 R5 = 00000000.00000001 R6 = 66666666.66666666 R7 = 77777777.77777777 R8 = FFFFFFFF.814FB040 R9 = 99999999.99999999 R10 = FFFFFFFF.814FB0C0 R11 = BBBBBBBB.BBBBBBBB R12 = CCCCCCCC.CCCCCCCC R13 = FFFFFFFF.810AD960 R14 = FFFFFFFF.81414018 R15 = 00000000.00000004 R16 = 00000000.000006AC R17 = 00000000.00000047 R18 = 00000000.00000000 R19 = 00000000.00000000 R20 = FFFFFFFF.8051A494 R21 = 00000000.00000000 R22 = 00000000.00000001 R23 = 00000000.00000010 R24 = FFFFFFFF.81414000 AI = FFFFFFFF.81414000 RA = FFFFFFFF.81006000 PV = 00000001.FFFFFFFF R28 = 00000000.00000000 FP = FFFFFFFF.88ABDFD0 PC = FFFFFFFF.8009C95C PS = 18000000.00001F04 Processor Internal Registers: ASN = 00000000.00000000 ASTSR/ASTEN = 00000000 IPL = 0000001F PCBB = 00000000.01014080 PRBR = FFFFFFFF.81414000 PTBR = 00000000.0000FFBF SCBB = 00000000.000001E8 SISR = 00000000.00000100 VPTB = FFFFFEFC.00000000 FPCR = 00000000.00000000 MCES = 00000000.00000000 KSP = FFFFFFFF.88ABDCD8 ESP = FFFFFFFF.88ABF000 SSP = FFFFFFFF.88AB9000 USP = FFFFFFFF.88AB9000 Spinlocks currently owned by CPU 00 SCS Address 810AF300 Owner CPU ID 00000000 IPL 00000008 Ownership Depth 00000000 Rank 0000001A Timeout Interval 002DC6C0 Share Array 00000000

SDA> SHOW CPU 0
CPU 00 Processor crash information
----------------------------------
CPU 00 reason for Bugcheck: CPUEXIT, Shutdown requested by another CPU 
 
Process currently executing on this CPU:   None 
 
Current IPL: 31  (decimal) 
 
CPU database address:  81414000 
 
CPUs Capabilities:    PRIMARY,QUORUM,RUN 
 
General registers: 
 
R0   = FFFFFFFF.81414000  R1   = FFFFFFFF.81414000  R2   = 00000000.00000000 
R3   = FFFFFFFF.810AD960  R4   = 00000000.01668E90  R5   = 00000000.00000001 
R6   = 66666666.66666666  R7   = 77777777.77777777  R8   = FFFFFFFF.814FB040 
R9   = 99999999.99999999  R10  = FFFFFFFF.814FB0C0  R11  = BBBBBBBB.BBBBBBBB 
R12  = CCCCCCCC.CCCCCCCC  R13  = FFFFFFFF.810AD960  R14  = FFFFFFFF.81414018 
R15  = 00000000.00000004  R16  = 00000000.000006AC  R17  = 00000000.00000047 
R18  = 00000000.00000000  R19  = 00000000.00000000  R20  = FFFFFFFF.8051A494 
R21  = 00000000.00000000  R22  = 00000000.00000001  R23  = 00000000.00000010 
R24  = FFFFFFFF.81414000  AI   = FFFFFFFF.81414000  RA   = FFFFFFFF.81006000 
PV   = 00000001.FFFFFFFF  R28  = 00000000.00000000  FP   = FFFFFFFF.88ABDFD0 
PC   = FFFFFFFF.8009C95C  PS   = 18000000.00001F04 
 
Processor Internal Registers: 
 
ASN  = 00000000.00000000                     ASTSR/ASTEN =          00000000 
IPL  =          0000001F  PCBB = 00000000.01014080  PRBR = FFFFFFFF.81414000 
PTBR = 00000000.0000FFBF  SCBB = 00000000.000001E8  SISR = 00000000.00000100 
VPTB = FFFFFEFC.00000000  FPCR = 00000000.00000000  MCES = 00000000.00000000 
 
        KSP    = FFFFFFFF.88ABDCD8 
        ESP    = FFFFFFFF.88ABF000 
        SSP    = FFFFFFFF.88AB9000 
        USP    = FFFFFFFF.88AB9000 
 
                Spinlocks currently owned by CPU 00 
 
SCS                                    Address        810AF300 
Owner CPU ID       00000000            IPL            00000008 
Ownership Depth    00000000            Rank           0000001A 
Timeout Interval   002DC6C0            Share Array    00000000

This example shows the default output of the SHOW CPU command on an Alpha system.

SHOW CRASH

Displays information about the state of the system at the time of failure. Provides system information identifying a running system and can display exception information.

Format

SHOW CRASH [/CPU=n]

Parameters

None.

Qualifier

/CPU=n
Allows exception data to be displayed from CPUs other than the one considered as the crash CPU when more than one CPU crashes simultaneously.

Description

The SHOW CRASH command has two different functions, depending on whether you use it to analyze a running system or a system failure.
When used during the analysis of a running system, the SHOW CRASH command produces a display that describes the system and the version of OpenVMS that it is running. The system crash information display contains the following information:

Name and version number of the operating system
Major and minor IDs of the operating system
Identity of the OpenVMS system, including an indication of its cluster membership
CPU ID of the primary CPU
Address of all CPU databases

When used during the analysis of a system failure, the SHOW CRASH command produces several displays that identify the system and describe its state at the time of the failure.
If the current CPU context for SDA is not that of the processor that signaled the bugcheck, or the CPU specified with the /CPU=n qualifier, the SHOW CRASH command first performs an implicit SET CPU command to make that processor the current CPU for SDA. (See the description of the SET CPU command and Section 2.5 for a discussion of how this can affect the CPU context---and process context---in which SDA commands execute.)
The system crash information display in this context provides the following information:
Date and time of the system failure.
Name and version number of the operating system.
Major and minor IDs of the operating system.
Identity of the system.
CPU IDs of both the primary CPU and the CPU that initiated the bugcheck. In a uniprocessor system, these IDs are identical.
Bitmask of the active and available CPUs in the system.
For each active processor in the system, the address of its CPU database and the name of the bugcheck that caused the system failure. Generally, there will be only one significant bugcheck in the system. All other processors typically display the following as their reason for taking a bugcheck:
CPUEXIT, Shutdown requested by another CPU
Subsequent screens of the SHOW CRASH command display information about the state of each active processor on the system at the time of the system failure. The information in these screens is identical to that produced by the SHOW CPU command, including the registers (Alpha), exception frame (I64), stack pointers, and records of spinlock ownership. The first such screen presents information about the processor that caused the failure; others follow according to the numeric order of their CPU IDs. For the processor that caused the failure, if an exception bugcheck (INVEXCEPTN, SSRVEXCEPT, FATALEXCEPT, UNXSIGNAL) or, for I64 only, also a KRNLSTAKNV or DEBUGCRASH bugcheck has occurred, SHOW CRASH first displays the exception frame from the original exception.
SHOW CRASH displays the original exception in process dumps, and additionally displays all CPU database addresses in system dumps.

Examples

#1
SDA> SHOW CRASH Version of system: OpenVMS (TM) Alpha Operating System, Version X901-SSB System Version Major ID/Minor ID: 3/0 VMScluster node: VMSTS6, a Crash CPU ID/Primary CPU ID: 00/00 Bitmask of CPUs active/available: 00000001/00000001 CPU bugcheck codes: CPU 00 -- INVEXCEPTN, Exception while above ASTDEL System State at Time of Exception --------------------------------- Exception Frame: ---------------- R2 = FFFFFFFF.810416C0 SCS$GA_LOCALSB+005C0 R3 = FFFFFFFF.81007E60 EXE$GPL_HWRPB_L R4 = FFFFFFFF.850AEB80 R5 = FFFFFFFF.81041330 SCS$GA_LOCALSB+00230 R6 = FFFFFFFF.81038868 CON$INITLINE R7 = FFFFFFFF.81041330 SCS$GA_LOCALSB+00230 PC = FFFFFFFF.803EF81C SYS$TTDRIVER+0F81C PS = 30000000.00001F04 FFFFFFFF.803EF80C: STL R24,#X0060(R5) FFFFFFFF.803EF810: LDL R28,#X0138(R5) FFFFFFFF.803EF814: BIC R28,R27,R28 FFFFFFFF.803EF818: 00000138 PC => FFFFFFFF.803EF81C: HALT FFFFFFFF.803EF820: HALT FFFFFFFF.803EF824: BR R31,#XFF0000 FFFFFFFF.803EF828: LDL R24,#X0138(R5) FFFFFFFF.803EF82C: BIC R24,#X40,R24 PS => MBZ SPAL MBZ IPL VMM MBZ CURMOD INT PRVMOD de 0 30 00000000000 1F 0 0 KERN 1 KERN Signal Array ------------ Length = 00000003 Type = 0000043C Arg = FFFFFFFF.803EF81C SYS$TTDRIVER+0F81C Arg = 30000000.00001F04 %SYSTEM-F-OPCDEC, opcode reserved to Digital fault at PC=FFFFFFFF803EF81C, PS=00001F04 Saved Scratch Registers in Mechanism Array ------------------------------------------ R0 = 00000000.00000000 R1 = FFFFFFFF.811998B8 R16 = 00000000.00001000 R17 = FFFFFFFF.8119B1F0 R18 = 00000000.00000010 R19 = FFFFFFFF.810194F0 R20 = 00000000.00000000 R21 = 0000000F.00000000 R22 = 00000000.00000000 R23 = 00000000.00004000 R24 = 00000000.00001000 R25 = 00000000.00000000 R26 = FFFFFFFF.81041474 R27 = 00000000.00004000 R28 = 00000000.00001000 . . . (CPU-specific display omitted) . . .

SDA> SHOW CRASH
Version of system: OpenVMS (TM) Alpha Operating System, Version X901-SSB 
 
System Version Major ID/Minor ID: 3/0 
 
VMScluster node: VMSTS6, a 
 
Crash CPU ID/Primary CPU ID:  00/00 
 
Bitmask of CPUs active/available:  00000001/00000001 
 
CPU bugcheck codes: 
        CPU 00 -- INVEXCEPTN, Exception while above ASTDEL 
 
System State at Time of Exception 
--------------------------------- 
Exception Frame: 
---------------- 
        R2  = FFFFFFFF.810416C0  SCS$GA_LOCALSB+005C0 
        R3  = FFFFFFFF.81007E60  EXE$GPL_HWRPB_L 
        R4  = FFFFFFFF.850AEB80 
        R5  = FFFFFFFF.81041330  SCS$GA_LOCALSB+00230 
        R6  = FFFFFFFF.81038868  CON$INITLINE 
        R7  = FFFFFFFF.81041330  SCS$GA_LOCALSB+00230 
        PC  = FFFFFFFF.803EF81C  SYS$TTDRIVER+0F81C 
        PS  = 30000000.00001F04 
 
         FFFFFFFF.803EF80C:     STL             R24,#X0060(R5) 
         FFFFFFFF.803EF810:     LDL             R28,#X0138(R5) 
         FFFFFFFF.803EF814:     BIC             R28,R27,R28 
         FFFFFFFF.803EF818:    00000138 
   PC => FFFFFFFF.803EF81C:     HALT 
         FFFFFFFF.803EF820:     HALT 
         FFFFFFFF.803EF824:     BR              R31,#XFF0000 
         FFFFFFFF.803EF828:     LDL             R24,#X0138(R5) 
         FFFFFFFF.803EF82C:     BIC             R24,#X40,R24 
 
   PS => 
         MBZ SPAL      MBZ    IPL VMM MBZ CURMOD INT PRVMOD de 
           0   30   00000000000 1F  0   0   KERN   1   KERN 
 
Signal Array 
------------ 
        Length = 00000003 
        Type   = 0000043C 
        Arg    = FFFFFFFF.803EF81C  SYS$TTDRIVER+0F81C 
        Arg    = 30000000.00001F04 
%SYSTEM-F-OPCDEC, opcode reserved to Digital fault at PC=FFFFFFFF803EF81C, PS=00001F04 
 
Saved Scratch Registers in Mechanism Array 
------------------------------------------ 
R0   = 00000000.00000000  R1   = FFFFFFFF.811998B8  R16  = 00000000.00001000 
R17  = FFFFFFFF.8119B1F0  R18  = 00000000.00000010  R19  = FFFFFFFF.810194F0 
R20  = 00000000.00000000  R21  = 0000000F.00000000  R22  = 00000000.00000000 
R23  = 00000000.00004000  R24  = 00000000.00001000  R25  = 00000000.00000000 
R26  = FFFFFFFF.81041474  R27  = 00000000.00004000  R28  = 00000000.00001000 
 
   .
   .
   .
                           (CPU-specific display omitted) 
   .
   .
   .

This long display reflects the output of the SHOW CRASH command within the analysis of a system failure on an OpenVMS Alpha system.

#2
SDA> SHOW CRASH System crash information ------------------------ Time of system crash: 12-OCT-2000 11:27:58.02 Version of system: OpenVMS (TM) Alpha Operating System, Version X74B-FT2 System Version Major ID/Minor ID: 3/0 System type: DEC 3000 Model 400 Crash CPU ID/Primary CPU ID: 00/00 Bitmask of CPUs active/available: 00000001/00000001 CPU bugcheck codes: CPU 00 -- PGFIPLHI, Pagefault with IPL too high System State at Time of Page Fault: ----------------------------------- Page fault for address 00000000.00046000 occurred at IPL: 8 Memory management flags: 00000000.00000001 (instruction fetch) Exception Frame: ---------------- R2 = 00000000.00000003 R3 = FFFFFFFF.810B9280 EXCEPTION_MON+39C80 R4 = FFFFFFFF.81564540 PCB R5 = 00000000.00000088 R6 = 00000000.000458B0 R7 = 00000000.7FFA1FC0 PC = 00000000.00046000 PS = 20000000.00000803 00000000.00045FF0: LDQ R2,#X0050(FP) 00000000.00045FF4: LDQ R12,#X0058(FP) 00000000.00045FF8: LDQ R13,#X0060(FP) 00000000.00045FFC: LDQ R14,#X0068(FP) PC => 00000000.00046000: BIS R1,R17,R1 00000000.00046004: BIS R31,#X01,R25 00000000.00046008: STQ_U R1,#X0002(R10) 00000000.0004600C: BSR R26,#X00738C 00000000.00046010: LDQ_U R16,#X0002(R10) PS => MBZ SPAL MBZ IPL VMM MBZ CURMOD INT PRVMOD de 0 20 00000000000 08 0 0 KERN 0 USER . . . (CPU-specific display omitted) . . .

SDA> SHOW CRASH
System crash information
------------------------
Time of system crash: 12-OCT-2000 11:27:58.02 
 
Version of system: OpenVMS (TM) Alpha Operating System, Version X74B-FT2 
 
System Version Major ID/Minor ID: 3/0 
 
System type: DEC 3000 Model 400 
 
Crash CPU ID/Primary CPU ID:  00/00 
 
Bitmask of CPUs active/available:  00000001/00000001 
 
CPU bugcheck codes: 
        CPU 00 -- PGFIPLHI, Pagefault with IPL too high 
 
System State at Time of Page Fault: 
----------------------------------- 
 
Page fault for address 00000000.00046000 occurred at IPL: 8 
Memory management flags: 00000000.00000001 (instruction fetch) 
 
Exception Frame: 
---------------- 
        R2  = 00000000.00000003 
        R3  = FFFFFFFF.810B9280  EXCEPTION_MON+39C80 
        R4  = FFFFFFFF.81564540  PCB 
        R5  = 00000000.00000088 
        R6  = 00000000.000458B0 
        R7  = 00000000.7FFA1FC0 
        PC  = 00000000.00046000 
        PS  = 20000000.00000803 
 
         00000000.00045FF0:     LDQ             R2,#X0050(FP) 
         00000000.00045FF4:     LDQ             R12,#X0058(FP) 
         00000000.00045FF8:     LDQ             R13,#X0060(FP) 
         00000000.00045FFC:     LDQ             R14,#X0068(FP) 
   PC => 00000000.00046000:     BIS             R1,R17,R1 
         00000000.00046004:     BIS             R31,#X01,R25 
         00000000.00046008:     STQ_U           R1,#X0002(R10) 
         00000000.0004600C:     BSR             R26,#X00738C 
         00000000.00046010:     LDQ_U           R16,#X0002(R10) 
 
   PS => 
         MBZ SPAL      MBZ    IPL VMM MBZ CURMOD INT PRVMOD de 
          0   20   00000000000 08  0   0   KERN   0   USER 
 
   .
   .
   .
                                        (CPU-specific display omitted) 
   .
   .
   .

This display reflects the output of a SHOW CRASH command within the analysis of a PGFIPLHI bugcheck on an OpenVMS Alpha system.

#3
SDA> SHOW CRASH System crash information ------------------------ Time of system crash: 1-DEC-2003 13:31:10.50 Version of system: OpenVMS I64 Operating System, Version XA2T-J2S System Version Major ID/Minor ID: 3/0 System type: HP rx2600 (900MHz/1.5MB) Crash CPU ID/Primary CPU ID: 01/00 Bitmask of CPUs active/available: 00000003/00000003 CPU bugcheck codes: CPU 01 -- database address 8396DD80 -- SSRVEXCEPT, Unexpected system se 1 other -- CPUEXIT, Shutdown requested by another CPU CPU 00 -- database address 83864000 System State at Time of Original Exception ------------------------------------------ Exception Frame at 00000000.7FF43BD0 ------------------------------------ IPL = 00 TRAP_TYPE = 00000008 Access control violation fault IVT_OFFSET = 00000800 Data TLB Fault IIP = 00000000.00020120 SYS$K_VERSION_08+00100 IIPA = 00000000.00020110 SYS$K_VERSION_08+000F0 IFA = 00000000.00000000 IPSR = 00001010.0A0A6010 RT TB LP DB SI DI PP SP DFH DFL DT PK I IC MFH MFL AC BE UP 1 0 1 0 0 0 0 0 1 0 1 0 1 1 0 1 0 0 0 IA BN ED RI SS DD DA ID IT MC IS CPL 0 1 0 0 0 0 0 0 1 0 0 0 PREVSTACK = 00 BSP = 00000000.7FF12240 BSPSTORE = 00000000.7FF120C0 BSPBASE = 00000000.7FF120C0 RNAT = 00000000.00000000 RSC = 00000000.00000003 LOADRS BE PL MODE 0000 0 0 Eager PFS = 00000000.00000B9F PPL PEC RRB.PR RRB.FR RRB.GR SOR SOL SOF 0 0. 0. 0. 0. 0. 23. (32-54) 31. (32-62) FLAGS = 00 STKALIGN = 000002D0 PREDS = 00000000.FF562AA3 IHA = FFFFFFFF.7FF3E120 INTERRUPT_DEPTH = 00 ISR = 00000804.00000000 ED EI SO NI IR RS SP NA R W X CODE 1 0 0 0 0 0 0 0 1 0 0 0000 ITIR = 00000000.FFFF0934 KEY PS FFFF09 0D IFS = 80000000.00000593 Valid RRB.PR RRB.FR RRB.GR SOR SOL SOF 1 0. 0. 0. 0. 11. (32-42) 19. (32-50) B0 = FFFFFFFF.80241AE0 AMAC$EMUL_CALL_NATIVE_C+00340 B1 = 80000000.FFD643B0 B2 = 00000000.00000000 B3 = 00000000.00000000 B4 = 00000000.00000000 B5 = 00000000.7FF43E38 B6 = 00000000.00020110 SYS$K_VERSION_08+000F0 B7 = FFFFFFFF.80A28170 NSA$CHECK_PRIVILEGE_C GP = 00000000.00240000 R2 = FFFFFFFF.839B8098 PSB+00058 R3 = E0000000.00000068 R4 = FFFFFFFF.839731C0 PCB R5 = 00000000.00000008 R6 = 00000000.7FF43F40 R7 = 00000000.00000002 R8 = 00000000.00010000 SYS$K_VERSION_07 R9 = 00000000.00000020 R10 = 00000000.0000003E R11 = 00000000.00000001 KSP = 00000000.7FF43EA0 R13 = 00000000.00000000 R14 = 00000000.00040008 UCB$M_SUPMVMSG+00008 R15 = 00000000.00020110 SYS$K_VERSION_08+000F0 R16 = FFFFFFFF.802417A0 AMAC$EMUL_CALL_NATIVE_C R17 = 00000000.00010004 UCB$M_DELETEUCB+00004 R18 = 00000000.00040000 UCB$M_CHAN_TEAR_DOWN R19 = 00000000.00040000 UCB$M_CHAN_TEAR_DOWN R20 = 00000000.7FF43F38 R21 = 00000000.7FF43F80 R22 = 00000000.00040000 UCB$M_CHAN_TEAR_DOWN R23 = 00000000.00000000 R24 = 00000000.00000000 R25 = 00000000.00000000 R26 = 00000000.00000000 R27 = 00000000.FF565663 R28 = 00000000.00000003 R29 = 00000000.7FF43EA0 R30 = 000007FD.C0000300 R31 = FFFFFFFF.806549D0 PROCESS_MANAGEMENT_MON+677D0 R32 = 00000000.7AC9DBC0 R33 = 00000000.00000001 R34 = 00000000.7FFCF88C MMG$IMGHDRBUF+0008C R35 = FFFFFFFF.83973528 ARB+00230 R36 = 00000000.00000000 R37 = 00000000.00000000 R38 = FFFFFFFF.80A28410 NSA$CHECK_PRIVILEGE_C+002A0 R39 = 00000000.00000915 R40 = FFFFFFFF.82D01640 SYSTEM_PRIMITIVES+00221440 R41 = 00000000.00000B9F R42 = 00000000.7FF43EA0 R43/OUT0 = 00000000.7FFCF87C MMG$IMGHDRBUF+0007C R44/OUT1 = E0000000.00000068 R45/OUT2 = 00000000.00000000 R46/OUT3 = 00000000.FF561663 R47/OUT4 = 00000000.7FFCDA68 CTL$AG_CLIDATA R48/OUT5 = 00000000.7FFCDBE8 CTL$AG_CLIDATA+00180 R49/OUT6 = 00000000.00000003 R50/OUT7 = FFFFFFFF.839731C0 PCB NATMASK = 003A NATS = 00000000.00000000 CSD = CFFFFFFF.00000000 SSD = CCCC0BAD.BAD0CCCC LC = 00000000.00000000 EC = 00000000.00000000 FPSR = 0009804C.0270033F SF3 SF2 SF1 SF0 TRAPS 004C 004C 004E 000C 3F F6 = 0FFC9.C0000000.00000000 F7 = 1003E.00000000.00000018 F8 = 1000B.FF000000.00000000 F9 = 10007.A8000000.00000000 F10 = 10003.C2492492.49249249 F11 = 0FFF6.C30C30C3.0C30C30C PPREVMODE = 03 Instruction Stream: ------------------- { .mfb SYS$K_VERSION_08+000E0: nop.m 000000 nop.f 000000 br.ret.sptk.many b0 ;; } { .mii SYS$K_VERSION_08+000F0: alloc r41 = ar.pfs, 0B, 08, 00 mov r29 = r12 mov r42 = r12 } { .mmi PC => SYS$K_VERSION_08+00100: ld4 r24 = [r0] ;; nop.m 000000 sxt4 r24 = r24 ;; } { .mii SYS$K_VERSION_08+00110: nop.m 000000 sxt4 r14 = r24 ;; cmp.eq p6, p7 = r14, r0 } { .mfb SYS$K_VERSION_08+00120: nop.m 000000 nop.f 000000 (p6) br.cond.dpnt.few 0000060 } Signal Array ------------ Length = 00000005 Type = 0000000C Arg = 00000000.00000000 Arg = 00000000.00000000 Arg = 00000000.00020120 Arg = 00000000.00000003 %SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=0000000000000000, PC=0000000000020120, PS=00000003 CPU 01 Processor state at time of SSRVEXCEPT bugcheck ----------------------------------------------------- CPU 01 reason for Bugcheck: SSRVEXCEPT, Unexpected system service exception Process currently executing on this CPU: SYSTEM Current image file: IPFEX3$DKB200:[SYS0.][SYSMGR]X.EXE;2 Current IPL: 0 (decimal) CPU database address: 8396DD80 CPUs Capabilities: QUORUM,RUN Exception Frame at 00000000.7FF435B0 ------------------------------------ IPL = 00 TRAP_TYPE = 00000041 Bugcheck Breakpoint Trap IVT_OFFSET = 00002C00 Break Instruction IIP = FFFFFFFF.80491E90 EXCEPTION_MON+5E690 IIPA = FFFFFFFF.80491E80 EXCEPTION_MON+5E680 IFA = 00000000.00030000 SYS$K_VERSION_01 . . . IIM = 00000000.00100002 BREAK$C_SYS_BUGCHECK PPREVMODE = 00 KR0 = 00000000.00000000 KR1 = 00000000.00000000 KR2 = 00000000.00000000 KR3 = 00000000.00000003 KR4 = 00000000.00000000 KR5 (Next Timer) = 000000BC.DEA95C24 KR6 (CPUdb VA) = FFFFFFFF.8396DD80 KR7 (Slot VA) = FFFFFFFF.86910000 KSP = 00000000.7FF43880 ESP = 00000000.7FF68000 SSP = 00000000.7FFAC000 USP = 00000000.7AC9DB60 No spinlocks currently owned by CPU 01 CPU 00 Processor state at time of CPUEXIT bugcheck -------------------------------------------------- CPU 00 reason for Bugcheck: CPUEXIT, Shutdown requested by another CPU Process currently executing on this CPU: None Current IPL: 31 (decimal) CPU database address: 83864000 CPUs Capabilities: PRIMARY,QUORUM,RUN Exception Frame at FFFFFFFF.8696F9F0 ------------------------------------ IPL = 1F TRAP_TYPE = 00000041 Bugcheck Breakpoint Trap IVT_OFFSET = 00002C00 Break Instruction IIP = FFFFFFFF.802F62F0 SYSTEM_SYNCHRONIZATION+43BF0 IIPA = FFFFFFFF.802F62F0 SYSTEM_SYNCHRONIZATION+43BF0 IFA = FFFFFFFF.86A280C0 . . . IIM = 00000000.00100002 BREAK$C_SYS_BUGCHECK PPREVMODE = 00 KR0 = 00000000.203D0000 KR1 = 00000000.60000000 KR2 = 00000000.00000000 KR3 = 00000000.0001001F KR4 = 00000000.00000000 KR5 (Next Timer) = 000000C4.FDFE03C8 KR6 (CPUdb VA) = FFFFFFFF.83864000 KR7 (Slot VA) = FFFFFFFF.8690F000 KSP = FFFFFFFF.8696FCC0 ESP = FFFFFFFF.86971000 SSP = FFFFFFFF.86957000 USP = FFFFFFFF.86957000 No spinlocks currently owned by CPU 00

SDA> SHOW CRASH
System crash information 
------------------------ 
 
Time of system crash:  1-DEC-2003 13:31:10.50 
 
 
Version of system: OpenVMS I64 Operating System, Version XA2T-J2S 
 
System Version Major ID/Minor ID: 3/0 
 
 
System type: HP rx2600  (900MHz/1.5MB) 
 
Crash CPU ID/Primary CPU ID:  01/00 
 
Bitmask of CPUs active/available:  00000003/00000003 
 
 
CPU bugcheck codes: 
        CPU 01 -- database address 8396DD80 -- SSRVEXCEPT, Unexpected system se 
 
        1 other -- CPUEXIT, Shutdown requested by another CPU 
                CPU 00 -- database address 83864000 
 
 
 
System State at Time of Original Exception 
------------------------------------------ 
 
Exception Frame at 00000000.7FF43BD0 
------------------------------------ 
 
 IPL             =                 00 
 TRAP_TYPE       =           00000008 Access control violation fault   
 IVT_OFFSET      =           00000800 Data TLB Fault 
 IIP             =  00000000.00020120 SYS$K_VERSION_08+00100 
 IIPA            =  00000000.00020110 SYS$K_VERSION_08+000F0 
 IFA             =  00000000.00000000 
 
 IPSR            =  00001010.0A0A6010 
   
                    RT  TB  LP  DB  SI  DI  PP  SP  DFH DFL DT  PK  I   IC  MFH MFL AC  BE  UP 
                    1   0   1   0   0   0   0   0   1   0   1   0   1   1   0   1   0   0   0 
                    IA  BN  ED  RI  SS  DD  DA  ID  IT  MC  IS  CPL 
                    0   1   0   0   0   0   0   0   1   0   0   0 
 
 PREVSTACK       =                 00 
 BSP             =  00000000.7FF12240 
 BSPSTORE        =  00000000.7FF120C0 
 BSPBASE         =  00000000.7FF120C0 
 RNAT            =  00000000.00000000 
 
 RSC             =  00000000.00000003 LOADRS   BE   PL   MODE 
                                      0000     0    0    Eager 
 
 PFS             =  00000000.00000B9F   
 
                    PPL    PEC    RRB.PR   RRB.FR   RRB.GR     SOR       SOL           SOF 
                    0       0.       0.       0.       0.       0.    23. (32-54)   31. (32-62) 
 
 FLAGS           =                 00 
 STKALIGN        =           000002D0 
 PREDS           =  00000000.FF562AA3 
 IHA             =  FFFFFFFF.7FF3E120 
 INTERRUPT_DEPTH =                 00 
 
 ISR             =  00000804.00000000  
 
 
                    ED  EI  SO  NI  IR  RS  SP  NA  R   W   X   CODE 
                    1   0   0   0   0   0   0   0   1   0   0   0000 
 
 
 ITIR            =  00000000.FFFF0934 KEY       PS 
                                      FFFF09    0D 
 
 IFS             =  80000000.00000593   
 
 
                    Valid         RRB.PR   RRB.FR   RRB.GR     SOR       SOL           SOF 
                    1                0.       0.       0.       0.    11. (32-42)   19. (32-50) 
 
 
 B0              =  FFFFFFFF.80241AE0 AMAC$EMUL_CALL_NATIVE_C+00340 
 B1              =  80000000.FFD643B0 
 B2              =  00000000.00000000 
 B3              =  00000000.00000000 
 B4              =  00000000.00000000 
 B5              =  00000000.7FF43E38 
 B6              =  00000000.00020110 SYS$K_VERSION_08+000F0 
 B7              =  FFFFFFFF.80A28170 NSA$CHECK_PRIVILEGE_C 
 
 GP              =  00000000.00240000 
 R2              =  FFFFFFFF.839B8098 PSB+00058 
 R3              =  E0000000.00000068 
 R4              =  FFFFFFFF.839731C0 PCB 
 R5              =  00000000.00000008 
 R6              =  00000000.7FF43F40 
 R7              =  00000000.00000002 
 R8              =  00000000.00010000 SYS$K_VERSION_07 
 R9              =  00000000.00000020 
 R10             =  00000000.0000003E 
 R11             =  00000000.00000001 
 
 KSP             =  00000000.7FF43EA0 
 
 R13             =  00000000.00000000 
 R14             =  00000000.00040008 UCB$M_SUPMVMSG+00008 
 R15             =  00000000.00020110 SYS$K_VERSION_08+000F0 
 R16             =  FFFFFFFF.802417A0 AMAC$EMUL_CALL_NATIVE_C 
 R17             =  00000000.00010004 UCB$M_DELETEUCB+00004 
 R18             =  00000000.00040000 UCB$M_CHAN_TEAR_DOWN 
 R19             =  00000000.00040000 UCB$M_CHAN_TEAR_DOWN 
 R20             =  00000000.7FF43F38 
 R21             =  00000000.7FF43F80 
 R22             =  00000000.00040000 UCB$M_CHAN_TEAR_DOWN 
 R23             =  00000000.00000000 
 R24             =  00000000.00000000 
 R25             =  00000000.00000000 
 R26             =  00000000.00000000 
 R27             =  00000000.FF565663 
 R28             =  00000000.00000003 
 R29             =  00000000.7FF43EA0 
 R30             =  000007FD.C0000300 
 R31             =  FFFFFFFF.806549D0 PROCESS_MANAGEMENT_MON+677D0 
 
 R32             =  00000000.7AC9DBC0 
 R33             =  00000000.00000001 
 R34             =  00000000.7FFCF88C MMG$IMGHDRBUF+0008C 
 R35             =  FFFFFFFF.83973528 ARB+00230 
 R36             =  00000000.00000000 
 R37             =  00000000.00000000 
 R38             =  FFFFFFFF.80A28410 NSA$CHECK_PRIVILEGE_C+002A0 
 R39             =  00000000.00000915 
 R40             =  FFFFFFFF.82D01640 SYSTEM_PRIMITIVES+00221440 
 R41             =  00000000.00000B9F 
 R42             =  00000000.7FF43EA0 
 
 R43/OUT0        =  00000000.7FFCF87C MMG$IMGHDRBUF+0007C 
 R44/OUT1        =  E0000000.00000068 
 R45/OUT2        =  00000000.00000000 
 R46/OUT3        =  00000000.FF561663 
 R47/OUT4        =  00000000.7FFCDA68 CTL$AG_CLIDATA 
 R48/OUT5        =  00000000.7FFCDBE8 CTL$AG_CLIDATA+00180 
 R49/OUT6        =  00000000.00000003 
 R50/OUT7        =  FFFFFFFF.839731C0 PCB 
 
 NATMASK         =               003A 
 NATS            =  00000000.00000000 
 CSD             =  CFFFFFFF.00000000 
 SSD             =  CCCC0BAD.BAD0CCCC 
 LC              =  00000000.00000000 
 EC              =  00000000.00000000 
 
 FPSR            =  0009804C.0270033F SF3    SF2    SF1    SF0    TRAPS 
                                      004C   004C   004E   000C   3F 
 
 F6              =  0FFC9.C0000000.00000000 
 F7              =  1003E.00000000.00000018 
 F8              =  1000B.FF000000.00000000 
 F9              =  10007.A8000000.00000000 
 F10             =  10003.C2492492.49249249 
 F11             =  0FFF6.C30C30C3.0C30C30C 
 
 PPREVMODE        =                 03 
 
Instruction Stream: 
------------------- 
                                    { .mfb 
         SYS$K_VERSION_08+000E0:                nop.m       000000 
                                                nop.f       000000 
                                                br.ret.sptk.many b0 ;; 
                                    } 
                                    { .mii 
         SYS$K_VERSION_08+000F0:                alloc       r41 = ar.pfs,  0B, 08, 00 
                                                mov         r29 = r12 
                                                mov         r42 = r12 
                                    } 
                                    { .mmi 
   PC => SYS$K_VERSION_08+00100:                ld4         r24 = [r0] ;; 
                                                nop.m       000000 
                                                sxt4        r24 = r24 ;; 
                                    } 
                                    { .mii 
         SYS$K_VERSION_08+00110:                nop.m       000000 
 
                                                sxt4        r14 = r24 ;; 
                                                cmp.eq      p6, p7 = r14, r0 
                                    } 
                                    { .mfb 
         SYS$K_VERSION_08+00120:                nop.m       000000 
                                                nop.f       000000 
                                           (p6) br.cond.dpnt.few 0000060 
                                    } 
 
Signal Array 
------------ 
        Length = 00000005 
        Type   = 0000000C 
        Arg    = 00000000.00000000 
        Arg    = 00000000.00000000 
        Arg    = 00000000.00020120 
        Arg    = 00000000.00000003 
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=0000000000000000, 
                                                    PC=0000000000020120, PS=00000003 
 
 
CPU 01 Processor state at time of SSRVEXCEPT bugcheck 
 
----------------------------------------------------- 
 
 
CPU 01 reason for Bugcheck: SSRVEXCEPT, Unexpected system service exception 
 
 
Process currently executing on this CPU: SYSTEM 
 
 
Current image file: IPFEX3$DKB200:[SYS0.][SYSMGR]X.EXE;2 
 
 
Current IPL: 0  (decimal) 
 
 
CPU database address: 8396DD80 
 
 
CPUs Capabilities:    QUORUM,RUN 
 
 
Exception Frame at 00000000.7FF435B0 
------------------------------------ 
 
    IPL              =                 00 
    TRAP_TYPE        =           00000041      Bugcheck Breakpoint Trap 
    IVT_OFFSET       =           00002C00      Break Instruction 
    IIP              =  FFFFFFFF.80491E90      EXCEPTION_MON+5E690 
    IIPA             =  FFFFFFFF.80491E80      EXCEPTION_MON+5E680 
    IFA              =  00000000.00030000      SYS$K_VERSION_01 
 
. 
. 
. 
 
    IIM              =  00000000.00100002      BREAK$C_SYS_BUGCHECK 
 
    PPREVMODE        =                 00 
 
    KR0              =  00000000.00000000 
    KR1              =  00000000.00000000 
    KR2              =  00000000.00000000 
    KR3              =  00000000.00000003 
    KR4              =  00000000.00000000 
    KR5 (Next Timer) =  000000BC.DEA95C24 
    KR6 (CPUdb VA)   =  FFFFFFFF.8396DD80 
    KR7 (Slot VA)    =  FFFFFFFF.86910000 
 
    KSP              =  00000000.7FF43880 
    ESP              =  00000000.7FF68000 
    SSP              =  00000000.7FFAC000 
    USP              =  00000000.7AC9DB60 
 
                No spinlocks currently owned by CPU 01 
 
 
 
CPU 00 Processor state at time of CPUEXIT bugcheck 
-------------------------------------------------- 
 
 
CPU 00 reason for Bugcheck: CPUEXIT, Shutdown requested by another CPU 
 
 
Process currently executing on this CPU:   None 
 
Current IPL: 31  (decimal) 
 
 
CPU database address: 83864000 
 
 
CPUs Capabilities:    PRIMARY,QUORUM,RUN 
 
 
Exception Frame at FFFFFFFF.8696F9F0 
------------------------------------ 
 
    IPL              =                 1F 
    TRAP_TYPE        =           00000041      Bugcheck Breakpoint Trap 
    IVT_OFFSET       =           00002C00      Break Instruction 
    IIP              =  FFFFFFFF.802F62F0      SYSTEM_SYNCHRONIZATION+43BF0 
    IIPA             =  FFFFFFFF.802F62F0      SYSTEM_SYNCHRONIZATION+43BF0 
    IFA              =  FFFFFFFF.86A280C0 
 
. 
. 
. 
 
    IIM              =  00000000.00100002      BREAK$C_SYS_BUGCHECK 
 
    PPREVMODE        =                 00 
 
    KR0              =  00000000.203D0000 
    KR1              =  00000000.60000000 
    KR2              =  00000000.00000000 
    KR3              =  00000000.0001001F 
    KR4              =  00000000.00000000 
    KR5 (Next Timer) =  000000C4.FDFE03C8 
    KR6 (CPUdb VA)   =  FFFFFFFF.83864000 
    KR7 (Slot VA)    =  FFFFFFFF.8690F000 
 
    KSP              =  FFFFFFFF.8696FCC0 
    ESP              =  FFFFFFFF.86971000 
    SSP              =  FFFFFFFF.86957000 
    USP              =  FFFFFFFF.86957000 
 
                No spinlocks currently owned by CPU 00

This example from an OpenVMS I64 system shows summary information on the crash: the time it occurred, its OpenVMS version, hardware type, and bugcheck codes. This is followed by the exception frame from the exception that triggered the crash, the instruction stream active at the time of the exception, and the signal array that describes the exception. The exception frame from the bugcheck triggered by the original exception is then displayed (that is, the bugcheck on the crash CPU) followed by the bugcheck exception frame for the other CPU in the system.

Contents

Index