HP OpenVMS systems documentation

The PROCESS PARAMETER statement displays a message to users about process parameter requirements.

Note The utility does not adjust process parameters.

Syntax

Parameter

name

Indicates the process parameter name. The name you specify must be valid on the system where the product executes.

Options

CONSUME value

Indicates that the process parameter must be increased by the specified value. Use this option when the product consumes a resource that is controlled by the process parameter. The value must be a single unquoted string that specifies an unsigned integer value. You cannot use this option with either the MAXIMUM, MINIMUM, or REQUIRE option.

MAXIMUM value

Indicates that the process parameter must have a value less than or equal to the specified value. The value must be a single unquoted string that specifies an integer value.

MINIMUM value

Indicates that the process parameter must have a value greater than or equal to the specified value. The value must be a single unquoted string that specifies an integer value.

REQUIRE value

Indicates that the process parameter must have the specified value. The value must be a single string that specifies a value of the parameter's type. This option is valid for any parameter data type. You cannot use this option with either the MAXIMUM, MINIMUM, or CONSUME option.

Description

The PROCESS PARAMETER statement displays a message to users after the installation about process parameter requirements. Note that the utility does not adjust process parameters.

Example

process parameter ASTLM minimum 6; 
process parameter BYTLM require 32768; 
process parameter PRCLM consume 2; 
process parameter FILLM maximum 40; 
      

These statements display a message to users that a process that executes the product must have the following process parameters:

ASTLM greater than or equal to 6
BYTLM set to 32768
PRCLM increased by 2
FILLM less than or equal to 40

The PROCESS PRIVILEGE statement displays a message to users about process privilege requirements.

Note The utility does not adjust process privileges.

Syntax

Parameter

name

Indicates the process privilege names as a list. The privileges you specify must be valid on the system where the product executes.

Description

The PROCESS PRIVILEGE statement displays a message to users after the installation about process privilege requirements. The utility does not adjust process privileges.

Example

process privilege (group, oper, tmpmbx, sysnam) ; 
      

The statement in this example displays a message to the user that processes using the product must have the GROUP, OPER, TMPMBX, and SYSNAM privileges.

The PRODUCT statement specifies product identification and other descriptive information about the product. The PRODUCT and END PRODUCT statements form a PRODUCT group.

Syntax

[ PDL-statements ]

END PRODUCT ;

Parameters

producer

Indicates the legal owner of the software product. This parameter must be a single quoted or unquoted string.

base

Indicates the base hardware and operating system combination on which the product is intended to be installed. This parameter must be a single quoted or unquoted string. By convention, the string AXPVMS denotes an OpenVMS Alpha product, VAXVMS denotes an OpenVMS VAX product, and VMS denotes a product applicable for either OpenVMS Alpha or VAX.

Although any base system name can be used when you package a product, Hewlett-Packard recommends that you use the names AXPVMS, VAXVMS, and VMS when developing products for use on OpenVMS.

name

Indicates the name of the product. This parameter must be a single quoted or unquoted string. The combination of the producer, base, and name parameters must be unique among products installed on the system.

version

Indicates the version of the product. This parameter must be a single quoted or unquoted string.

kittype

Indicates the kit type of the product through use of one of the following keywords or keyword phrases:

• FULL--a complete description of a layered product (application software) that can be used to install or upgrade the product.
• OPERATING SYSTEM--a complete description of an operating system that can be used to install or upgrade the product. Only one product or operating system type can be installed on the system.
• PARTIAL--a partial (incomplete) description of a product that can be used only to upgrade an existing version of the same product. Installation of a partial kit changes the version number of the product and can upgrade a product of type full, operating system, or platform. A partial kit must contain an UPGRADE statement and have the same producer-base-name identification string as the product it upgrades.
• PATCH--a partial (incomplete) description of a product that can be used only to update an existing version of a product. Installation of a patch kit does not change the version number of the product and can update a product type: full, operating system, or platform. A patch kit must contain an APPLY TO statement and have a different producer-base-name identification string than the product it updates.
• PLATFORM--a complete description of a suite of products that can be used to install or upgrade the entire set of products.
• TRANSITION--a complete or incomplete description of a product that was installed on the system by another installation method, such as VMSINSTAL. A transition kit is used only to register a previously installed product; it does not contain any product material. Registration using a transition kit defines the name of a product and its managed objects in the POLYCENTER Software Installation product database. After a product is registered, the utility can use this information to satisfy software dependency requirements that other products may have on the availability of this product.
  The keyword TRANSITION used alone denotes a layered product; the keyword phrase TRANSITION OPERATING SYSTEM denotes an operating system.
• MANDATORY UPDATE--functionally identical to a patch kit. Its type implies that the patch must be applied to the product it updates.

See Section 3.5 for a more detailed description of kit types and example PDFs.

Option

PDL-statements

Any product description language statement or a group of statements described in this reference section, except the PRODUCT and END PRODUCT statements.

Required Terminator

Description

The PRODUCT statement specifies product identification and other descriptive information about the product. The PRODUCT and END PRODUCT statements form the product group. A product description file consists of a product group and any other PDL statements that this group might enclose.

The PRODUCT statement is a utility directive and does not specify a managed object.

Examples

product HP VAXVMS FMS V2.4 full ; 
    file [sysmsg]fdvshr.exe image library ; 
    file [sysmsg]fmsmsg.exe ; 
    file [sysexe]fmsfed.exe ; 
    file [sysexe]fmsfaa.exe ; 
    file [sysexe]fmsfte.exe ; 
    directory [systest.fms] ; 
    file [systest.fms]ivp.exe ; 
    file [systest.fms]samp.flb ; 
end product ; 
      

The PRODUCT statement in this example identifies the product as FMS version 2.4 that is intended to be installed on an OpenVMS VAX system.

product HP AXPVMS INTERNET_PRODUCTS V1.1 platform ; 
   .
   .
   .
end product ; 
      

The PRODUCT statement in this example identifies INTERNET_PRODUCTS Version 1.1 as a suite of products (that is, a platform) for installation on an OpenVMS Alpha system.