Document revision date: 15 July 2002

E
ENQLM process limit
Error Log utility (ERROR LOG)
invoking
Errors
capturing retransmission
CI port recovery
fatal errors detected by data link #1
fatal errors detected by data link #2
recovering from CI port
returned by SYS$LAVC_DEFINE_NET_COMPONENT subroutine
returned by SYS$LAVC_DEFINE_NET_PATH subroutine
returned by SYS$LAVC_DISABLE_ANALYSIS subroutine
returned by SYS$LAVC_ENABLE_ANALYSIS subroutine
returned by SYS$LAVC_START_BUS subroutine
returned by SYS$LAVC_STOP_BUS subroutine
stopping NISCA protocol on LAN adapters
stopping the LAN on all LAN adapters #1
stopping the LAN on all LAN adapters #2
when stopping the NISCA protocol
Ethernet
configurations
configuring adapter
error-log entry
hardware address
header for datagrams
large-packet support
monitoring activity
MSCP server access to shadow sets
port
setting up LAN analyzer
Ethernet E*driver physical device driver
EXPECTED_VOTES system parameter #1
EXPECTED_VOTES system parameter #2
EXPECTED_VOTES system parameter #3
EXPECTED_VOTES system parameter #4
EXPECTED_VOTES system parameter #5
EXPECTED_VOTES system parameter #6
Extended message acknowledgment
Extended sequence numbers
for datagram flags
F
Failover
dual-host OpenVMS Cluster configuration
dual-ported disks
dual-ported DSA tape
preferred disk
FDDI F*driver physical device driver
FDDI (Fiber Distributed Data Interface)
configurations
configuring adapter
error-log entry
hardware address
header for datagrams
influence of LRPSIZE on
large-packet support
massively distributed shadowing
monitoring activity
port
use of priority field
Feedback option
Fibre Channel interconnect #1
Fibre Channel interconnect #2
File system
distributed #1
distributed #2
Files
cluster-accessible
security
shared
startup command procedure
system
clusterwide coordination
moving off system disk
Filters
distributed enable
distributed trigger
HP 4972 LAN Protocol Analyzer
LAN analyzer
local area OpenVMS Cluster packet
local area OpenVMS Cluster retransmission
Flags
ACK transport datagram
AUTHORIZE datagram flag in CC header
DATA transport datagram
datagram flags field
in the CC datagram
reserved #1
reserved #2
REXMT datagram
RSVP datagram
SEQ datagram
TR/CC datagram
G
Galaxy Configuration Utility (GCU)
Galaxy configurations
$GETSYI system service
Graphical Configuration Manager (GCM)
H
Hang conditions
diagnosing
Hardware components
Headers
CC
DX
Ethernet
FDDI
TR
HELLO datagram #1
HELLO datagram #2
congestion
HP 4972 LAN Protocol Analyzer
HSC subsystems
assigning allocation classes
changing allocation class values #1
changing allocation class values #2
dual-pathed disks
dual-ported devices #1
dual-ported devices #2
served devices
HSD subsystems
assigning allocation classes
HSJ subsystems
assigning allocation classes
changing allocation class values #1
changing allocation class values #2
dual-ported devices
HSZ subsystems
I
Installation procedures
layered products
Interconnects #1
Interconnects #2
Interconnects #3
Interprocessor communication
IO$_SETPRFPATH $QIO function
ISEs (integrated storage elements)
peripherals
use in an OpenVMS Cluster
L
LAN adapters
BYE datagram
capturing traffic data on
datagram flags
overloaded
selecting
sending CCSTART datagram #1
sending CCSTART datagram #2
sending HELLO datagrams #1
sending HELLO datagrams #2
stopping #1
stopping #2
stopping NISCA protocol
VACK datagram #1
VACK datagram #2
VERF datagram #1
VERF datagram #2
LAN analyzers #1
LAN analyzers #2
analyzing retransmission errors
distributed enable filter
distributed enable messages
distributed trigger filter
distributed trigger messages
filtering retransmissions
packet filter
scribe program
starter program
LAN bridges
use of FDDI priority field
LAN Control Program (LANCP) utility
booting cluster satellites #1
booting cluster satellites #2
LAN$DEVICE_DATABASE.DAT file
LAN$NODE_DATABASE.DAT file
LAN$DEVICE_DATABASE.DAT file
LAN$NODE_DATABASE.DAT file
LAN path
load distribution
See NISCA transport protocol
See PEDRIVER
LAN$POPULATE.COM
LAN protocol analysis program
troubleshooting NISCA protocol levels
LANs (local area networks)
alternate adapter booting
analyzing retransmission errors
capturing retransmissions #1
capturing retransmissions #2
changing to mixed interconnect
configurations
configuring adapter #1
configuring adapter #2
controlling with sample programs
creating a network component list
creating a network component representation
data capture
debugging satellite booting
device-attention entry
distributed enable messages
distributed trigger messages
downline loading
drivers in PI protocol
enabling data capture
error-log entry
Ethernet troubleshooting
hardware address
LAN address for satellite
LAN control subroutines
large-packet support for FDDI
LRPSIZE system parameter
maximum packet size
monitoring LAN activity
multiple paths
network failure analysis #1
network failure analysis #2
NISCA Protocol
NISCA protocol
NISCS_CONV_BOOT system parameter
OPCOM messages
path selection and congestion control appendix
port
required tools for troubleshooting
sample programs #1
sample programs #2
satellite booting #1
satellite booting #2
satellite booting #3
satellite booting #4
single-adapter booting
starting network failure analysis
starting NISCA protocol
on LAN adapters
stopping network failure analysis
stopping NISCA protocol #1
stopping NISCA protocol #2
on LAN adapters #1
on LAN adapters #2
stopping on all LAN adapters
subroutine package #1
subroutine package #2
subroutine package #3
subroutine package #4
subroutine package #5
subroutine package #6
transmit path selection
troubleshooting NISCA communications
LAVC$FAILURE_ANALYSIS.MAR program
distributed enable filter
distributed enable messages
distributed trigger filter
distributed trigger messages
filtering LAN packets
filtering LAN retransmissions
filters
partner program
retransmission errors
sample program
scribe program
starter program
%LAVC-I-ASUSPECT OPCOM message
LAVc protocol
See NISCA transport protocol
See PEdriver
%LAVC-S-WORKING OPCOM message
LAVC$START_BUS.MAR sample program
LAVC$STOP_BUS.MAR sample program
%LAVC-W-PSUSPECT OPCOM message
LAVc_all filter
HP 4972 LAN Protocol Analyzer
LAVc_TR_ReXMT filter
HP 4972 LAN Protocol Analyzer
Layered products
installing
License database
Licenses
DECnet
installing
OpenVMS Cluster systems
OpenVMS operating system
LMF (License Management Facility)
Load balancing
determining failover target
devices served by MSCP
MSCP I/O
dynamic #1
dynamic #2
static #1
static #2
queue database files
queues #1
queues #2
Load capacity ratings
Load file
satellite booting
Local area OpenVMS Cluster environments
capturing distributed trigger event
debugging satellite booting #1
debugging satellite booting #2
network failure analysis
Lock database
LOCKDIRWT system parameter
used to control lock resource trees
Logical names
clusterwide
in applications
invalid
system management #1
system management #2
defining
for QMAN$MASTER.DAT
system
LOGINOUT
determining process quota values
Logins
controlling
disabling
LRPSIZE system parameter #1
LRPSIZE system parameter #2
LTM (LAN Traffic Monitor)

	privacy and legal statement
4477PRO_INDEX_002.HTML