From:	MERC::"uunet!DRYCAS.CLUB.CC.CMU.EDU!vmsnet-request"  8-JUN-1992 09:46:19.36
To:	mccall!vmsnet-newsgate
CC:	
Subj:	RE: WorldBlazer register settings wanted...

In article <1992Jun5.205029.4315@dmc.com>, munroe@dmc.com (Dick Munroe) writes:
> Anybody out there got a good set of settings for Telebit's new WorldBlazer? 
> I've just got a couple of them and I'll be replacing my TB+s, but if someone
> else has got them running with DECUS UUCP I'll start from there instead of
> trying to figure them out from scratch.

WorldBlazer - SA - Version LA5.00W- Active Configuration
 B1  E1  L2  M1  Q2  T   V1  X1  Y0
&C1 &D3 &G0 &J0 &L0 &Q0 &R3 &S4 &T4 &X0
S000:1   S001=0   S002=43  S003=13  S004=10  S005=8   S006=2   S007=40
S008=2   S009=6   S010=14  S011=70  S012=50  S018=0   S025=5   S026=1
S038=0   S041=0   S045=0   S046=0   S047=4   S048=0   S050=0   S051:5
S056=17  S057=19  S058:2   S059:15  S060=0   S061:0   S062=15  S063=0
S064=0   S068:2   S069=0   S090=0   S092:1   S093=8   S094=1   S100=0
S104=0   S105=1   S111=255 S112=1   S151=4   S155=0   S180=2   S181=1
S183=25  S190=1   S191=7   S253=10  S254=255 S255=255

These values should, in general, work fine.  

The only caveat is that you might have some trouble calling modems that
are not capable of (or configured to)  accept a MNP error control
negotiation request.  When calling modems/sites of  this category, you
should adapt your dialer script to set S180=0 during that call.  

One could argue that S180 should always be disabled, but in that
environment, sites/users that call this modem will not be able to
establish  an MNP connection if they want to.  

When speaking to a NON PEP modem, it is desireable to establish MNP
connections since besides the data reliability, you can actually achieve
higher throughput than without MNP.  This is regardless of MNP-5
Compression.

--
Mark Pizzolato - INFO COMM Computer Consulting, Redwood City, Ca
PHONE:	(415)369-9366	UUCP:  decwrl!infopiz!mark or uunet!lupine!infopiz!mark
DOMAIN:	mark@infocomm.com