From:	CSBVAX::CSBVAX::MRGATE::"SMTP::CRVAX.SRI.COM::RELAY-INFO-VAX" 11-FEB-1989 05:09
To:	MRGATE::"ARISIA::EVERHART"
Subj:	Re: Running a VAXstation with a serial console


Received: From KL.SRI.COM by CRVAX.SRI.COM with TCP; Fri, 10 FEB 89 20:51:21 PDT
Received: from ucbvax.Berkeley.EDU by KL.SRI.COM with TCP; Fri, 10 Feb 89 20:49:59 PST
Received: by ucbvax.Berkeley.EDU (5.61/1.34)
	id AA15378; Fri, 10 Feb 89 20:41:50 -0800
Received: from USENET by ucbvax.Berkeley.EDU with netnews
	for info-vax@kl.sri.com (info-vax@kl.sri.com)
	(contact usenet@ucbvax.Berkeley.EDU if you have questions)
Date: 11 Feb 89 04:04:29 GMT
From: mailrus!wasatch!cetron@tut.cis.ohio-state.edu  (Edward J Cetron)
Organization: Morrison-Knudsen, Industrial Buildings Division, SLC, UT
Subject: Re: Running a VAXstation with a serial console
Message-Id: <1097@wasatch.UUCP>
References: <8902100643.AA21596@ucbvax.Berkeley.EDU>
Sender: info-vax-request@kl.sri.com
To: info-vax@kl.sri.com



	You should be able to pull the graphics boards and reset the CSR
address to +2 (it is currently set to the standard base address which I
can't remember and don't have the manuals available).  If you THEN want
to still use it, you have to assign it as qd1, leave a dummy qd0 and then
link the qd1 special files to the qd0 special files...

-ed cetron
cetron@wasatch.utah.edu